Part Location Diagram of WR17X11170 GE Dispenser Housing Shield
See part 58 in the diagram
( Grid squares measure 1x1 inch )

Dispenser Housing Shield WR17X11170

Rated by 4 customers 

?

Really Easy 

15 - 30 mins 

Ratings submitted by customers like you who bought this part.

?
$20.46
In Stock
Fix Number:
FIX292255
Manufacturer #:
WR17X11170
Manufactured by:
GE

Product Description

This part helps to contain parts for the ice and water dispenser. The overlay and dispenser board is attached on the front of the housing shield.

Questions and Answers

We're sorry, but our Q&A experts are temporarily unavailable.
Please check back later if you still haven't found the answer you need.

View More View Less
Ice Funnel
$41.00
In Stock
Torsion-Fit Spring
$10.38
In Stock
Ice Funnel - White
$42.42
In Stock
Affresh Washing Machine Cleaner - 3 pack
$12.58
In Stock
Produce Preserver Filter
$21.50
In Stock
Affresh Dishwasher Cleaner Tablets - 6
$19.09
In Stock
Cooktop Cleaning Cream
$15.57
In Stock
Cooktop Cleaner
$17.74
In Stock
Affresh Cleaner
$19.09
In Stock

Installation Instructions Provided by Fix customers like you.

Average Repair Rating: 4.1 / 5.0, 4 reviews.
  • 1
Sort by:
Sorry, we couldn't find any existing installation instruction that matched.
Customer:
Michael from Denton, MD
Parts Used:
WR17X11264, WR17X11170
Difficulty Level:
Really Easy
Total Repair Time:
15 - 30 mins
Tools:
Screw drivers
No water in door dispenser
Verified that the pump was working and found that the water line was frozen in the door .decided to use hair dryer to thaw and ended up melting water dispenser and housing so had to replace . it took about 30min to change out but you do need a little skill to do it .by the way ended up leaving door open to thaw and all is well good luck on your repair.
0 of 1 people found this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
Customer:
Betty from Bethel Park, PA
Parts Used:
WR17X11267, WR17X11170
Difficulty Level:
Easy
Total Repair Time:
15 - 30 mins
Tools:
Screw drivers
No Ice Or Water from Dispenser
Replaced the dispenser housing & Ice Funnel that was damaged from trying to thaw the water supply to the dispenser with a hair dryer . Only problem is that the ice funnel is Black but the original was white , but it works fine
0 of 1 people found this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
Customer:
Kevin from Whitwell, TN
Parts Used:
WR17X11264, WR17X11170
Difficulty Level:
Easy
Total Repair Time:
15 - 30 mins
Tools:
Screw drivers
Replaced dispenser housing and ice funnel
Carefully remove selector panel from door by taking a small flat screw driver and prying forward on bottom of panel. Unplug all 3 wires connecting panel to fridge.They are locked with a small clip on over front of plug. Remove the 4 phillips screws and carefully remove the housing (moving wires not to pull on them). Remove the funnel by r aising the retaining stops and pull straight out. Save the spring to use on the new parts. Unplug the light and push the side in and take it out from the front side. Unclip the switch on the other side. Reassemble the new housing using the reverse steps of disassembly. When putting housing back in door be cautious not to pinch the wires between housing and door frame. This was a very simple job but requires patience working with small parts and tight areas.
0 of 1 people found this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
Customer:
stephen from Plymouth, MN
Parts Used:
WR38X23216, WR17X11170
Difficulty Level:
Really Easy
Total Repair Time:
15 - 30 mins
Tools:
Screw drivers
Ice dispenser on front door melted and needed replacement
This model refrigerator has a tendency for the water line ( through door) to freeze up, in my attemp to accelerat the defrosting in melted the the flap, the dispenser housing and on removing the front trim broke some of the tabs. Pulled off the trim , used a small screw driver to lift the tabs on the top of the electronics board, I then p ulled off the three wire sockets ( lift the plastic tab first) all three are different sizes so cannot be reinstalled incorrectly, unscrewed the dispenser housing , removed the spring for reuse. Reverse this process, don't forget the spring, order the front tim as a precaution,
0 of 1 people found this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
  • 1

Model Compatibility

This part works with the following models:
Fix Number: FIX292255
Manufacturer Part Number: WR17X11170
Brand
Model Number
Description
General Electric
A4425GDTABB
Refrigerator
General Electric
A4425GDTAWW
Refrigerator
General Electric
A4425GDTBBB
Refrigerator
General Electric
A4425GDTBWW
Refrigerator
General Electric
BSS25GFPACC
Refrigerator
General Electric
BSS25GFPAWW
Refrigerator
General Electric
BSS25GFPCCC
Refrigerator
General Electric
BSS25GFPCWW
Refrigerator
General Electric
BSS25GFPDCC
Refrigerator
General Electric
BSS25GFPDWW
Refrigerator
General Electric
BSS25GFPECC
Refrigerator
General Electric
BSS25GFPEWW
Refrigerator
General Electric
BSS25GFPHCC
Refrigerator
General Electric
BSS25GFPHWW
Refrigerator
General Electric
BSS25JFRFWW
Refrigerator
General Electric
BSS25JFRJWW
Refrigerator
General Electric
BSS25JFTAWW
Refrigerator
General Electric
BSS25JFTBWW
Refrigerator - T Series
General Electric
BSS25JFTCWW
Refrigerator - T Series
General Electric
BSS25JFTDWW
Refrigerator
General Electric
BSS25JFTEWW
Refrigerator - T Series
General Electric
BSS25JFTGWW
Refrigerator
General Electric
BSS25JFTHWW
Refrigerator
General Electric
BSS25JFTIWW
Refrigerator
General Electric
BSS25JFTJWW
Refrigerator
General Electric
BSS25JFTNWW
Refrigerator
General Electric
BSS25JFTPWW
Refrigerator
General Electric
BSS25JSRFSS
Refrigerator
General Electric
BSS25JSRJSS
Refrigerator
General Electric
BSS25JSTASS
Refrigerator