GH6177XPT5 Whirlpool Microwave - Instructions
Jump to:
Keep searches simple. Use keywords, e.g. "leaking", "pump", "broken" or "fit".
- Customer:
- Claude from Maramar, FL
- Parts Used:
- W10450172
- Difficulty Level:
- Really Easy
- Total Repair Time:
- Less than 15 mins
Broken vent grille.
It was very easy, no tools needed. I simply snapped the new part into the self aligning grooves.
Was this instruction helpful to you?
Thank you for voting!
- Customer:
- Timothy from Highlands Ranch, CO
- Parts Used:
- W10450188
- Difficulty Level:
- Really Easy
- Total Repair Time:
- Less than 15 mins
Cracked hood over microwave
the part pressed fit right in in less than a few minutes
Was this instruction helpful to you?
Thank you for voting!
- Customer:
- Thomas from BELLE VERNON, PA
- Parts Used:
- W10272107
- Difficulty Level:
- Easy
- Total Repair Time:
- 30 - 60 mins
- Tools:
- Screw drivers
Door handle was cracked/broke
Easy install ... just removed a couple of screws and had pry the plastic cover and trim around door. i did break a couple of clips but it did not affect the door when reassembled. Youtube it
Was this instruction helpful to you?
Thank you for voting!
- Customer:
- joseph from Brightwaters, NY
- Parts Used:
- W10450189
- Difficulty Level:
- Really Easy
- Total Repair Time:
- Less than 15 mins
broken vent grill
It took me longer to get the part out of the box. clips were included, I'm completely happy!
Was this instruction helpful to you?
Thank you for voting!
- Customer:
- Richard from Boca Raton, FL
- Parts Used:
- 8184915
- Difficulty Level:
- Really Easy
- Total Repair Time:
- 15 - 30 mins
- Tools:
- Pliers, Screw drivers
Display screen was loose, plastic frame was broken
Open door and remove vent cover buy pulling gently. Next un plug the microwave. emove the screw at the top of the control panel. Slide the control panel straight up until the hooks on the sides slip out of the slots. Tip the panel toward you and unplug the three different plugs near the top of the panel. Now the panel will tip further out and it can be moved around to get the metal catch at the bottom to come out of the slot. This will let the panel tip down to a horizontal position making it easier to work on. Remove the one screw that holds the circuit board to the plastic rack. There are three tabs that hold it in place but all of mine were broken off. Next remove the three screws that hold the plastic rack and the screw that holds the grounding wire. Lift the circuit board up and slide the old plastic rask out. Don't forget to unplug the sensor light from the rack. Slide the new rack in place and snap the circuit board onto the new rack. Replace all screws, put the control panel back into the slot then put the hooks on the sides back into their slots, replace the screw at the top. Put the vent cover back on, plug it in and go have a beer.
Was this instruction helpful to you?
Thank you for voting!
- Customer:
- Carlton from Cameron, NC
- Parts Used:
- W10112514A
- Difficulty Level:
- Really Easy
- Total Repair Time:
- Less than 15 mins
- Tools:
- Screw drivers
Dirty charcoal filter
Simply remove two screws with a crosstip screwdriver securing the vent louvers from top of microwave, remove the old charcoal filter and replace new filter as describe in the owners manual. Very easy installation and partselect parts are very inexpensive and durable to other sites.
Was this instruction helpful to you?
Thank you for voting!
- Customer:
- Paul from Pittsburg, CA
- Parts Used:
- W10450189
- Difficulty Level:
- Really Easy
- Total Repair Time:
- Less than 15 mins
Vent grille replacement
Unpacked the vent grille and walked to the microwave. Lifted grille up to the vacant space. Applied a small amount of pressure while pushing the grille into place. Walked to the refrigerator to fetch part one of an Egg Nog beverage, then to the cupboard for the best part of the Egg Nog beverage. Stirred ingredients and continued with decorating the Christmas tree. Voila!
Was this instruction helpful to you?
Thank you for voting!
- Customer:
- Laura from Independence, KY
- Parts Used:
- W10246505
- Difficulty Level:
- A Bit Difficult
- Total Repair Time:
- 30 - 60 mins
Door Handle Broken
I went to a popular parts supply website and used thier repair information (video) to fix the handle. Without that information it would have taken a lot longer to figure out.
Was this instruction helpful to you?
Thank you for voting!
- Customer:
- Jeffrey from MOUNT ULLA, NC
- Parts Used:
- W10269458
- Difficulty Level:
- Really Easy
- Total Repair Time:
- 30 - 60 mins
- Tools:
- Screw drivers
The close door warning kept coming on and the microwave would not run
Don't waste your time with other parts stores online. Partselect sells quality parts and they arrived 2 days early. I purchase a door switch from another online store and the switch was defective.
Was this instruction helpful to you?
Thank you for voting!
- Customer:
- Margaret from Portage, MI
- Parts Used:
- W10450172
- Difficulty Level:
- Really Easy
- Total Repair Time:
- Less than 15 mins
- Tools:
- Screw drivers
Vent grille was either broken when installed or broke when it fell
The replacement part was easy to install and, despite the description that said it didn't come with the clips, the clips were attached. In fact, the box included a clip that was never installed when my microwave was originally installed. The additional clip probably would have prevented the grille from falling off in the first place.
Was this instruction helpful to you?
Thank you for voting!
- Customer:
- Mary from Ocala, FL
- Parts Used:
- 4393799
- Difficulty Level:
- Really Easy
- Total Repair Time:
- Less than 15 mins
broken glass tray
Washed the glass tray and put in the microwave oven. Easy..
Was this instruction helpful to you?
Thank you for voting!
- Customer:
- Ron from Summerville, SC
- Parts Used:
- W10450189
- Difficulty Level:
- Really Easy
- Total Repair Time:
- Less than 15 mins
Broken Vent Grille for the microwave
Thanksgiving night, I found a rather large crack in the grille and it wouldn't stay in place. I placed the order for the replacement grille on Friday and received the new grille Monday. It just snapped in place, no tools necessary. I had contacted the Sears parts replacement department and all I got was attitude from the parts "help" desk. I'm glad I placed the order with Parts Select, the cost was cheaper and shipping was faster. I won't hesitate to use Parts Select the next time I need a part for any of my Whirlpool appliances.
Was this instruction helpful to you?
Thank you for voting!
- Customer:
- Mary from Peoria, AZ
- Parts Used:
- W10450187
- Difficulty Level:
- Really Easy
- Total Repair Time:
- Less than 15 mins
Grill vent broke off
It really just snaps into place- nothing to it.
The only small problem is, it's a different color than the original. The original was gray and the new one is black but it still looks fine.
The only small problem is, it's a different color than the original. The original was gray and the new one is black but it still looks fine.
Was this instruction helpful to you?
Thank you for voting!
- Customer:
- Gail from Cincinnati, OH
- Parts Used:
- W11252182
- Difficulty Level:
- Really Easy
- Total Repair Time:
- Less than 15 mins
glass turntable broke in half, ring turn needed replaced
I removed the broken tray and ring-turn and replaced it with the new
Service was fantastic, parts were ordered one day and received the next
Service was fantastic, parts were ordered one day and received the next
Was this instruction helpful to you?
Thank you for voting!
- Customer:
- Richard from League City, TX
- Parts Used:
- W10450172
- Difficulty Level:
- Really Easy
- Total Repair Time:
- Less than 15 mins
- Tools:
- Screw drivers
Old part would not stay on due to broken clip base
Ordered new part on Thursday night and new part arrived the following Monday. After unpacking I just snapped the new grille in place and the job was done. I was really impressed with the quick service that I received from PartSelect.
Was this instruction helpful to you?
Thank you for voting!