GDWT668V00SS General Electric Dishwasher - Instructions
Jump to:
Keep searches simple. Use keywords, e.g. "leaking", "pump", "broken" or "fit".
- Customer:
- Lawrence from Smithtown, NY
- Parts Used:
- WD35X21041, WH23X10028
- Difficulty Level:
- Really Easy
- Total Repair Time:
- Less than 15 mins
- Tools:
- Screw drivers
Tray rollers had broken off.
Replaced the original roller connectors with newly designed connectors. Works much better.
Was this instruction helpful to you?
Thank you for voting!
- Customer:
- Richard from Venice, FL
- Parts Used:
- WD24X10045
- Difficulty Level:
- Really Easy
- Total Repair Time:
- 15 - 30 mins
- Tools:
- Nutdriver, Screw drivers
Recived used without drain hose
It was an install. My problem is that the drain tube is not standard to other dishwashers,so I could not get it at either of the local home improvement centers. The good news is that it is larger than the standard, and offers better discharge.
Was this instruction helpful to you?
Thank you for voting!
- Customer:
- Rebecca from West Friendship, MD
- Parts Used:
- WD35X21041
- Difficulty Level:
- Really Easy
- Total Repair Time:
- Less than 15 mins
The wheels fell off the bottom rack of the dishwasher
The replacement studs that were suggested fixed the problem that we were having. The fix was easy and took less than ten minutes to take the broken studs out and snap the new ones into place. The studs are designed to hold onto the rack much tighter than the original studs and completely fixed the problem of the wheels falling off anytime you tried to move the bottom rack.
Was this instruction helpful to you?
Thank you for voting!
- Customer:
- JOHN from EAST HAMPTON, CT
- Parts Used:
- WD35X21041
- Difficulty Level:
- Really Easy
- Total Repair Time:
- Less than 15 mins
wheels off
snapped on wheels
Was this instruction helpful to you?
Thank you for voting!
- Customer:
- thomas from loganville, GA
- Parts Used:
- WD35X21041
- Difficulty Level:
- Really Easy
- Total Repair Time:
- Less than 15 mins
The axles on the bottom rack of my dishwasher were letting go and wheels were lying flat
The repair was very simple. I removed all eight wheels and discarded the old axles by pinching them out of each wheel and replacing them with the new (and improved) axles. I then turned the rack upside down and simply snapped the wheels back on the spindles. It took me longer to explain this than it took to make the repairs.
Was this instruction helpful to you?
Thank you for voting!
- Customer:
- Susan from Colorado Springs, CO
- Parts Used:
- WD35X21041
- Difficulty Level:
- Really Easy
- Total Repair Time:
- Less than 15 mins
All the wheel axles were broken or loose on the bottom tray of the dishwasher.
The repair was so simple a child could do it. It took less than five minutes and now the drawer rolls smoothly and is quite sturdy.
Was this instruction helpful to you?
Thank you for voting!
- Customer:
- Eric from Germantown, MD
- Parts Used:
- WD35X21041
- Difficulty Level:
- Really Easy
- Total Repair Time:
- Less than 15 mins
The lower rack wheels kept coming off
I examined the wheels and noticed that they were actually fine, it was just the clip on axles that had worn out. I had recently used a dishwasher cleaner, I think that was the straw that broke the camels back. The replacement axles that I ordered were actually a bit different than the original. It turns out they had been greatly improved, so the new ones snapped easily into place by hand. The lower rack rolls perfectly, like new!
Was this instruction helpful to you?
Thank you for voting!
- Customer:
- Simon from Great Falls, VA
- Parts Used:
- WD35X21041
- Difficulty Level:
- Really Easy
- Total Repair Time:
- Less than 15 mins
The lower rack, front wheels kept falling off and getting melted on the element
We ordered 4 wheels and axels, took off the old wheels, assembled the new wheels by popping the axel into the wheel (really simple) and then snapping them onto the post. It was incredibly simple. We waited 3 days for the wheels to arrive,the mailing cost was more than the parts! The result is amazing, the lower rack now runs smoothly and sits inside the washer as it should do without falling down all the time. Well worth the small amount of effort to find the right part and much cheaper than buying a new one!
Was this instruction helpful to you?
Thank you for voting!
- Customer:
- Melissa from Vienna, VA
- Parts Used:
- WD35X21041
- Difficulty Level:
- Really Easy
- Total Repair Time:
- Less than 15 mins
New wheels for lower rack on dishwasher.
Ordered on a Friday and parts arrived Sat. No tools required. Pieces easily slipped into place. Dishwasher is all fixed. This site is much easier to use than GE's. Will use PartSelect for all future replacement parts.
Was this instruction helpful to you?
Thank you for voting!
- Customer:
- Jonathan from New York, NY
- Parts Used:
- WD35X21041
- Difficulty Level:
- Really Easy
- Total Repair Time:
- Less than 15 mins
Wheels keep falling off dish rack.
So easy and the posts on the site were incredibly helpful in determing what part i needed. The wheels on the dish rack inside the dishwasher kept falling off. I had to keep lifting the dish rack in and out of the dish washer to load and unload it. Unbelievably annoying. I popped the old wheel axels out of the exisiting wheels and replaced them with the new wheel axels I ordered from PartSelect. Then I attached the wheels back on the dish rack and it was right back to normal.
Was this instruction helpful to you?
Thank you for voting!
- Customer:
- julie from Saint Charles, MO
- Parts Used:
- WD12X10163
- Difficulty Level:
- Easy
- Total Repair Time:
- Less than 15 mins
soap dispenser latch was broken & didnt shut
We had to replace the soap dispenser. My husband is not very handy & this was a snap. You take off the front panel (cover) of the sishwasher & simply unscrew the old one & screw in the new one. I probably could have done it myself.
Was this instruction helpful to you?
Thank you for voting!
- Customer:
- Farrell from Grass Valley, CA
- Parts Used:
- WD35X21041
- Difficulty Level:
- Really Easy
- Total Repair Time:
- Less than 15 mins
Needed to replace original wheels on bottom rack
Very easy job. Just took out the bottom rack and replaced the wheels that kept falling off. A no brainer! works wonderful now. Most impressed with the ease of ordering and amazed how quickly the parts were delivered to me. I saved alot of money doing it myself! Thnak you
Was this instruction helpful to you?
Thank you for voting!
- Customer:
- Sharon from Northfield, MN
- Parts Used:
- WD35X21041, WD35X21041, WD08X10032
- Difficulty Level:
- Easy
- Total Repair Time:
- 15 - 30 mins
difficulty rolling the lower rack in and out of dishwasher
Replaced all 8 of the wheels and axles (the old axles wouldn't hold the wheels in place any longer). Replaced the tub gasket because of cuts from knives. Both fixes were relatively easy to do, although directions for the tub gasket would have been nice!
Was this instruction helpful to you?
Thank you for voting!
- Customer:
- Suzanne from Oak Ridge, NJ
- Parts Used:
- WD35X21041
- Difficulty Level:
- Easy
- Total Repair Time:
- Less than 15 mins
The wheels kept falling off the bottom rack of the dishwasher
My husband took off all the wheels and changed the axles. We had friends who had the same problem and they led us to your web site.
Was this instruction helpful to you?
Thank you for voting!
- Customer:
- Jason from Omaha, NE
- Parts Used:
- WD35X21041
- Difficulty Level:
- Really Easy
- Total Repair Time:
- Less than 15 mins
Needed new wheels
I inserted wheel axle into wheel and attached to bottom rack axle. It was simple. No problems.
Was this instruction helpful to you?
Thank you for voting!