Some of the parts we sell are eligible for mail-in rebates since we can recycle them. We will display any applicable rebates in your shopping cart. To redeem your rebate, contact Customer Service after you have received your part.
Damper Pad Kit 203956
Works With Model A8140!
$45.20
In Stock
- Fix Number:
- FIX2017036
- Manufacturer #:
- 203956
- Manufactured by:
- Whirlpool
Works With Model A8140!
- Product Description
- This damper pad kit is used for base support. It comes with three six inch damper pads, two little tubes of lubricant. NOTE: This part will need adhesive to stick it in place.
- Works with the following brands:
- Maytag, International, Jenn-Air
- Works with the following products
- Washer, Washer Dryer Combo
- Fixes the following symptoms
- Shaking and Moving
- Part# 203956 replaces these:
- AP4024203, 1282, 203956, 2-13072, 2-13497, 203956, 203956VP, 213072, 213497
Part Number Cross Reference
Product Description
This damper pad kit is used for base support. It comes with three six inch damper pads, two little tubes of lubricant. NOTE: This part will need adhesive to stick it in place.
-
Works with the following brands:Maytag, International, Jenn-Air
-
Works with the following products:Washer, Washer Dryer Combo
-
Fixes the following symptoms:Shaking and Moving
-
Part# 203956 replaces these:AP4024203, 1282, 203956, 2-13072, 2-13497, 203956 ... Show more , 203956VP, 213072, 213497 Show less
Videos For installing this part.
Replacing your Damper Pad Kit
Questions and Answers
We're sorry, but our Q&A experts are temporarily unavailable.
Please check back later if you still haven't found the answer you need.
- < Prev
- 1
- Next >
Sort by:
Search filter:
Clear Filter
Your search term must have 3 or more characters.
Keep searches simple. Use keywords, e.g. "leaking", "pump", "broken" or "fit".
Sorry, we couldn't find any existing answers that matched.
Try using some different or simpler keywords, or submit your new question by using the "Ask a Question" button above!
Try using some different or simpler keywords, or submit your new question by using the "Ask a Question" button above!
John
October 30, 2021
What if you can’t get a brake wrench, what do you use ?
For model number A712
Hello John, Thank you for your inquiry. You can try using a pipe wrench or a pair of vice grips and a hammer. We hope this helps.
Was this helpful?
Thank you for voting!
Related Parts Additional or alternate parts to consider.
View More
View Less
Installation Instructions Provided by Fix customers like you.
- < Prev
- 1
- Next >
Sort by:
Search filter:
Clear Filter
Your search term must have 3 or more characters.
Keep searches simple. Use keywords, e.g. "leaking", "pump", "broken" or "fit".
Sorry, we couldn't find any existing installation instruction that matched.
My washer was making a squeaky noise and vibrating on the rinse cycle.
I unplugged the washer then took the front cover off and took the screws holding the lid out. Then i leaned the washer back against the wall and unscrewed the nuts holding the 3 tub hold down springs. These look like 2 seperate nuts, 1 on top and 1 under the washer bottom but it is 1 long body nut so just put the socket on the bottom and
... Read more
back it all the way off. Then Take the drive and pump belts off and put blocking down under the tub pulley and pull the washer back down so the tub is resting on the Blocking, this will raise it up enough to clean the cone hub where the damper pads go. I used a mirror propped up inside the back of the washer to see the back side of the damper area to clean and install the new pads.The kit does not come with the glue needed to put the pads back on so don't forget to order it with the parts. Also the glue does not give a full cure time so i gave it 24 hours to be sure it was set. then i started putting everything back together. The tub springs gave me the most trouble. I was able to get 1 on easy but the other 2 i had to use a clamp on the support to the spring and use a pry bar to hold the spring down far enough to start the nut back on. But after that it all went easy and quick.This site does a great job with all the helpful instructions, pictures and videos.
Read less
7 of 8 people
found this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
Machine moved across room during spin cycle
i had my son who is skilled auto mechanic fix it for me, by replacing new parts ordered. iIt works like a new machine again. He had to clean off old silicone grease that had turned into glue before installing new damper pad kit.
1 person
found this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
1980 Maytag tub/basket wobble on spin, tub off center when stopped
After removing the front panel I found one damper pad was hanging half out. After lifting the tub with a piece of 4x4 PVC found a second pad totally gone. Suggestions: use the 4x4 lift method works fine if you position the washer so you can remove the rear round access panels and work behind the washer to clean/install the rear pad. A sho
... Read more
rt piece (6" roughly) of 2x4 or similar works good to "prop" the whole tub forward to re-attach the front spring last. Replacing pads and belt didn't cure the tub/basket wobble but then tuning-adjusting the springs tensions nuts individually with (and without) a load in the tub on spin did re-center the tub and equalized-reduced somewhat (40%?) the amount of tub-basket spin balance wobble. Yes the washer is leveled very carefully in both axis. Replaced the original motor tension springs and (worn!) drive belt to hopefully extend the life. DEFINITELY worth the effort to keep my wife happy!!!!
Read less
1 person
found this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
- < Prev
- 1
- Next >
★
Customer Reviews
Filter By Rating:
- < Prev
- 1
- Next >
Sort by:
Search filter:
Clear Filter
Your search term must have 3 or more characters.
Keep searches simple. Use keywords, e.g. "leaking", "pump", "broken" or "fit".
Sorry, we couldn't find any existing reviews that matched. Try using some different or simpler keywords.
John Mark Y - August 28, 2022
Verified Purchase
Just what I needed
Shipped promptly. Appreciated the "how to" video. It showed some significant shortcuts that made the job relatively simple
Model Compatibility
This part works with the following models:
Fix Number: FIX2017036
Manufacturer Part Number: 203956
Manufacturer Part Number: 203956
Brand
Model Number
Description
✖
Mail-In Recycling Rebate