Some of the parts we sell are eligible for mail-in rebates since we can recycle them. We will display any applicable rebates in your shopping cart. To redeem your rebate, contact Customer Service after you have received your part.
Water Inlet Valve WP8540751
$72.31
In Stock
- Fix Number:
- FIX11746288
- Manufacturer #:
- WP8540751
- Manufactured by:
- Whirlpool
- Product Description
- This water inlet valve attaches the water lines to the back of your appliance. The attaching solenoids on the valve open and close according to the desired temperature or amount of water needed.
- Works with the following brands:
- Kenmore, Whirlpool, Maytag
- Works with the following products
- Washer
- Fixes the following symptoms
- Leaking, No hot or cold water
- Part# WP8540751 replaces these:
- AP6013067, 8540043, 8540751, WP8540751VP
Part Number Cross Reference
Product Description
This water inlet valve attaches the water lines to the back of your appliance. The attaching solenoids on the valve open and close according to the desired temperature or amount of water needed.
-
Works with the following brands:Kenmore, Whirlpool, Maytag
-
Works with the following products:Washer
-
Fixes the following symptoms:Leaking, No hot or cold water
-
Part# WP8540751 replaces these:AP6013067, 8540043, 8540751, WP8540751VP
Videos For installing this part.
Replacing your Water Inlet Valve
Questions and Answers
We're sorry, but our Q&A experts are temporarily unavailable.
Please check back later if you still haven't found the answer you need.
Related Parts Additional or alternate parts to consider.
Installation Instructions Provided by Fix customers like you.
- < Prev
- 1
- Next >
Sort by:
Search filter:
Clear Filter
Your search term must have 3 or more characters.
Keep searches simple. Use keywords, e.g. "leaking", "pump", "broken" or "fit".
Sorry, we couldn't find any existing installation instruction that matched.
- Customer:
- Edward from San Antonio, FL
- Parts Used:
- WP8540751
- Difficulty Level:
- Easy
- Total Repair Time:
- 30 - 60 mins
- Tools:
- Pliers, Screw drivers
Water wouldn't enter washing machine
Shut off water, remove water hoses, removed top of washer to get to water inlet valve, disconnected wires on old valve and installed new valve. reconnect wires and put everything back.
2 of 2 people
found this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
- Customer:
- Ronald from Fairfax, VA
- Parts Used:
- WP8540751
- Difficulty Level:
- Really Easy
- Total Repair Time:
- 15 - 30 mins
- Tools:
- Nutdriver, Pliers, Screw drivers, Wrench (Adjustable)
Inlet valve leaking intermittently into washer after finished
Fairly simple to do, turn off the water, unplug machine, remove top three bolts at back top of washer, slide cover off, unscrew the supply hoses from inlet valve at top (watch for drips from water in each hose), remove one screw holding valve, use pliers to loosen interior valve hose from valve, pull the two colored electric connectors fr
... Read more
om the valve, pull out valve from inside top of machine, slide the new one in. Reverse the tasks: screw new valve in, plug in the two electric connectors, put interior hose back on, screw on supply hoses snug at back, slide top cover back on, tighten the three bolts, turn water back on at the valves, slide washer back in place, plug washer back in. About 15-20 minutes, tops. Depending of course on how much you have to pull the washer out from its location to get at the fittings. Worked like a charm, new valve works great.
Read less
1 person
found this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
- Customer:
- Robert from Austin, TX
- Parts Used:
- WP8540751
- Difficulty Level:
- Very Easy
- Total Repair Time:
- 30 - 60 mins
- Tools:
- Nutdriver, Pliers, Screw drivers
Tub filled with water after washer finished cycle
Took off lid and replaced water inlet value and replaced hoses.
0 of 1 people
found this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
- Customer:
- Deborah from Rawson, OH
- Parts Used:
- WP8540751
- Difficulty Level:
- Really Easy
- Total Repair Time:
- 15 - 30 mins
- Tools:
- Nutdriver, Pliers, Screw drivers
Frozen inlet valve
1. Remove the electrical plug from the wall out let. 2. Shut off water supply to washer. 3. Remove water hoses from the washer, hot and cold. 4. Removed the top panel by removing the three screws. 5. Removed hose from the inlet valve with a pair of pliers to remove clamp. 6. Removed the screw that holds the inlet valve from the back panel
... Read more
. 7. Removed the electrical connection from the inlet valve with a small comman screw driver by prying up on clip. 8. install in the reverse matter.
Read less
0 of 1 people
found this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
- < Prev
- 1
- Next >
★
Customer Reviews
Filter By Rating:
- < Prev
- 1
- Next >
Sort by:
Search filter:
Clear Filter
Your search term must have 3 or more characters.
Keep searches simple. Use keywords, e.g. "leaking", "pump", "broken" or "fit".
Sorry, we couldn't find any existing reviews that matched. Try using some different or simpler keywords.
DENNIS H - March 7, 2021
Verified Purchase
I don’t have to go to the laundry mat!!??
Part works great
Model Compatibility
This part works with the following models:
Fix Number: FIX11746288
Manufacturer Part Number: WP8540751
Manufacturer Part Number: WP8540751
Brand
Model Number
Description
✖
Mail-In Recycling Rebate