Drain Hose WP696710

Remove panel from above Washing machine, release plastic clips on front side the washing machine approximately 2 inches in from each end with a putty knife. Remove one screw on each side of inner cabinet washing machine at the top. Raise front panel approximately 1/2 inch to release lower clips on front panel. Remove upper and lowe ... Read more r clip from pump on the left side and remove pump from motor. Remove upper and lower hose and lower discharge hose from pump. Unplug the two wire connecting terminal on the right front corner of the washing machine. Raise the top panel of washing machine and secure with a wire coat hanger. This will allow much easier access to the other end of the drain hose . Move the washer tub to the left, which allows easier access. Remove hose clamp with pliers, twist hose and remove. Install new drain hose and reassemble machine in the reverse order.