Breville Coffee Maker Parts

Breville Appliance Parts

Popular Breville Coffee Maker Parts

Latte Whisk Magnet
$9.40
In Stock
Fix Number
FIX12008385
Manufacturer Part Number
SP0002499
This replacement latte frothing disk is a genuine OEM sourced part, not an aftermarket equivalent. It is specially designed for Breville milk frother. This item is used to make latte froth for smooth and silky milk. It is made out of plastic and it is sold individually. No tools needed to replace.
Frothing Disc
$15.72
In Stock
Fix Number
FIX12008384
Manufacturer Part Number
SP0002498
This is a manufacturer-approved frothing disc, sold individually. This frothing disc creates a thick and creamy froth, suitable for cappuccinos. Slide the frothing disc onto the shaft at the base of the milk jug, ensuring the wide end is face down. Push it firmly until you hear a click. If the disc is not properly in place or it has become dislodged this can cause the milk to not swirl, a burnt milky smell, or a grinding noise. Make sure you always add ingredients slowly and in small amounts, as adding ingredients quickly can cause the disc to disengage or prevent it from spinning. The manufacturer recommends washing it by hand with warm soapy water to help it last longer. Be sure to wash and allow it to dry after each use.
Brew Basket Assembly
$36.02
In Stock
★★★★★
★★★★★
1 Review
Fix Number
FIX12008049
Manufacturer Part Number
SP0000771
Designed for use in Breville Your Brew coffee makers, this OEM part is sourced directly from Breville. To ensure this part fits your device, please see the "Model Cross Reference List" below. This Brew Basket is made of durable plastic and includes the lid and the seals. This part should be replaced when coffee or water leaks around the seals, or if the Brew Basket is otherwise damaged. The Coffee Filter (Part #SP0000769) is commonly purchased with the Basket. No tools are needed to replace this part. Each Basket Assembly is sold individually.
Carafe Lid Complete
$14.13
In Stock
★★★★★
★★★★★
4 Reviews
Fix Number
FIX12008050
Manufacturer Part Number
SP0000774
This carafe lid is a genuine OEM replacement part. It is designed specially for the Breville The You Brew Coffee Maker. This lid provides a seal for the carafe and allows the proper amount of coffee to be dripped into the pot while brewing. It should be replaced if it is lost, cracked, or broken. This part is made of plastic and sold individually.
Coffee Filter
$24.47
In Stock
★★★★★
★★★★★
3 Reviews
Fix Number
FIX12008048
Manufacturer Part Number
SP0000769
This gold-toned coffee filter is an original part from Breville and was designed for use in the You Brew coffeemakers listed below. The filter is used to strain coffee grounds out during the brewing process. To replace this part, simply open the lid and remove the old part from the coffee basket. The new filter can then be placed inside. One item is included per order.
Steam Nozzle With O-ring Assem
$15.72
In Stock
Fix Number
FIX17585762
Manufacturer Part Number
SP0022926
This steam wand tip kit is a high-quality replacement designed to maintain optimal milk frothing performance in your espresso machine. Featuring a precision 4-hole design, it creates smooth, creamy microfoam ideal for latte art and specialty drinks. The kit includes durable O-rings to ensure a secure seal and prevent leaks, restoring your machine’s original functionality. Installation is quick and simple, requiring no special tools, making it an easy DIY solution for consistent steaming results.
54mm One Cup - Dual Wall Filte
$21.05
In Stock
Fix Number
FIX17585645
Manufacturer Part Number
SP0001519
It is an authentic dual wall filter single cup that is supplied by the original manufacturer for use with Breville coffeemakers. This replacement filter is used to hold the coffee ground inside the unit. It can be used to make a single cup of freshly brewed coffee. If the part is missing or is damaged, this will provide an identical replacement for the original component that was included with a new unit. Please note this durable stainless steel dual wall filter is sold individually. Refer to the owner's manual for the correct application.
Tank Water Assembly
$28.79
In Stock
Fix Number
FIX17585898
Manufacturer Part Number
SP0100209
This water tank assembly is a durable, high-quality reservoir designed for select espresso machines, providing a secure and reliable source of water for brewing. Made from sturdy plastic, it ensures long-lasting performance and maintains the original fit and functionality of your appliance. The tank is easy to install—simply remove the old reservoir and slide the new one into place—making it a quick DIY solution to keep your coffee machine operating at its best.
Thermal Carafe
$59.75
On Order
Fix Number
FIX17585755
Manufacturer Part Number
SP0022665
This stainless steel thermal carafe is a direct replacement for the original that comes with the Precision Brewer® Thermal coffee maker. It’s built to maintain coffee temperature and flavor, with a durable brushed finish and a comfortable handle for easy use. Designed for quick installation, it fits securely into the brewer’s base and restores full functionality if your original carafe is damaged or no longer effective.
Shower Head Ring And Seal
$7.96
On Order
Fix Number
FIX17585748
Manufacturer Part Number
SP0021707
This ring and seal assembly ensures even water distribution through the brewing head while preventing leaks around the interface. Wear may result in dripping, uneven extraction, or pressure loss. Replacement restores proper dispersion and consistent beverage quality.

Breville Coffee Maker Appliance Types

Popular Breville Coffee Maker Models