Some of the parts we sell are eligible for mail-in rebates since we can recycle them. We will display any applicable rebates in your shopping cart. To redeem your rebate, contact Customer Service after you have received your part.
Burner with Igniter WB16K10035
Works With Model JGB600EED1ES!
$160.61
In Stock
- Fix Number:
- FIX952996
- Manufacturer #:
- WB16K10035
- Manufactured by:
- GE
Works With Model JGB600EED1ES!
- Product Description
- The igniter does not come with wire nuts. *** Please NOTE: The igniter connector may need to be cut off and wires spliced to the range wiring with the porcelain wire nuts.
- Works with the following brands:
- General Electric, Kenmore, Hotpoint
- Works with the following products
- Range
- Fixes the following symptoms
- Little to no heat when baking, Gas igniter glows, but will not light, Oven not heating evenly
- Part# WB16K10035 replaces these:
- AP3205796, 1021861, WB16K10035, WB16K0029, WB16K29
Part Number Cross Reference
Product Description
The igniter does not come with wire nuts. *** Please NOTE: The igniter connector may need to be cut off and wires spliced to the range wiring with the porcelain wire nuts.
-
Works with the following brands:General Electric, Kenmore, Hotpoint
-
Works with the following products:Range
-
Fixes the following symptoms:Little to no heat when baking, Gas igniter glows, but will not light, Oven not heating evenly
-
Part# WB16K10035 replaces these:AP3205796, 1021861, WB16K10035, WB16K0029, WB16K29
Questions and Answers
We're sorry, but our Q&A experts are temporarily unavailable.
Please check back later if you still haven't found the answer you need.
Related Parts Additional or alternate parts to consider.
Installation Instructions Provided by Fix customers like you.
- < Prev
- 1
- Next >
Sort by:
Search filter:
Clear Filter
Your search term must have 3 or more characters.
Keep searches simple. Use keywords, e.g. "leaking", "pump", "broken" or "fit".
Sorry, we couldn't find any existing installation instruction that matched.
- Customer:
- ERIC from MATTOON, IL
- Parts Used:
- WB16K10035
- Difficulty Level:
- A Bit Difficult
- Total Repair Time:
- 30 - 60 mins
- Tools:
- Nutdriver, Pliers, Screw drivers, Socket set
The stove would not heat up
Unplug appliance and pull out from wall, remove lower drawers if applicable and set aside, open oven door and remove lower panel which covers burner, from underneath remove lower covers around burner , this will give you access to igniter and burner,three screws hold burner in place, two on bottom and one on top. Remember to unplug ignite
... Read more
r from gas valve,then remove as an assembly, I recommend replacing burner and igniter together as unit as the igniter will burn holes through burner. Reinstall in reverse order and plug back in, make sure it works before you put the stove back in place.
Read less
1 person
found this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
- Customer:
- Karen from Fort Lauderdale, FL
- Parts Used:
- WB16K10035
- Difficulty Level:
- Really Easy
- Total Repair Time:
- 15 - 30 mins
Burner burnt out
We ordered the part on Monday, part was received by Friday; we call the Gas Company to install the part, our over was working the same night.
0 of 1 people
found this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
- < Prev
- 1
- Next >
Model Compatibility
This part works with the following models:
Fix Number: FIX952996
Manufacturer Part Number: WB16K10035
Manufacturer Part Number: WB16K10035
Brand
Model Number
Description
✖
Mail-In Recycling Rebate