Part Location Diagram of 316011200 Frigidaire Surface Burner Igniter Electrode
See part 11 in the diagram
( Grid squares measure 1x1 inch )

Surface Burner Igniter Electrode 316011200

Rated by 2 customers 

?

Easy 

30 - 60 mins 

Ratings submitted by customers like you who bought this part.

?
$32.01
In Stock
Fix Number:
FIX436633
Manufacturer #:
316011200
Manufactured by:
Frigidaire

Product Description

Use this igniter with sealed burners.

Questions and Answers

We're sorry, but our Q&A experts are temporarily unavailable.
Please check back later if you still haven't found the answer you need.

1 question answered by our experts.
  • 1
Sort by:
Sorry, we couldn't find any existing answers that matched.
Try using some different or simpler keywords, or submit your new question by using the "Ask a Question" button above!
James
October 25, 2023
Looking for ignitor electrode for Kenmore Gas Range Model 790.7433310, Serial # VF3415612. I can't even find a Kenmore Part # listed that I can look for an OEM replacement.
For model number 790.7433310
Fix.com logo
Hi James, thank you for the question. We have found that the burner electrodes do not come separately. It comes with the surface burner orifice holder. The part numbers for the electrodes and burner orifice holders are given below: Right front orifice holder, part number FIX3490754. Right rear orifice holder, part number FIX2345283. Left front orifice holder, part number FIX2332710. Left rear orifice holder, part number FIX2368569. Middel burner orifice holder, part number FIX2368574. We hope this information helps!

Was this helpful?
Thank you for voting!
Related Parts:
Affresh Washing Machine Cleaner - 3 pack
$12.58
In Stock
Produce Preserver Filter
$21.50
In Stock
Affresh Dishwasher Cleaner Tablets - 6
$19.09
In Stock
Cooktop Cleaning Cream
$15.57
In Stock
Cooktop Cleaner
$17.74
In Stock
Affresh Cleaner
$19.09
In Stock

Installation Instructions Provided by Fix customers like you.

Average Repair Rating: 3.1 / 5.0, 2 reviews.
  • 1
Sort by:
Sorry, we couldn't find any existing installation instruction that matched.
Customer:
marigrace from smyrna, DE
Parts Used:
316011200
Difficulty Level:
Really Easy
Total Repair Time:
15 - 30 mins
Tools:
Pliers
burner sparker didn't work, wouldn't light
my stove top really doesn't lift unless the burners are disconnected from the rigid gas tubing. however the screws and screw heads are all rusted in and deteriorated from years of salts, heat and moistures (not at all removable). I could lift my stove top about 3 inches with out crimping or cracking the tubes (be very gentle). because the ceramics on the igniter was cracked thus didn't work anyway, from under the stove top I took needle nose pliers and twisted the bracket that's attached to the sparker and twisted it out of the hole and out of the way (unclipped the wire) slid the new sparker in the hole, pushed the attached bracket into the crack between the old bent down bracket and the burner metal with needle nose pliers (be very gentle not to crack the new ceramics). reattatched the wire clip and it worked. be sure to push the sparker up as far as the original sparkers or it takes a lot longer to light releasing too much gas (unpleasant). there is no real weight on that sparker so there is no real need for a great big screw to hold it in.
0 of 1 people found this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
Customer:
Todd from Warwick, NY
Parts Used:
316011200
Difficulty Level:
A Bit Difficult
Total Repair Time:
1- 2 hours
Tools:
Screw drivers, Wrench (Adjustable)
Cracked igniter electrode
The part was exactly the right size for my model and worked perfectly. The repair however, as others have mentioned, was not so smooth. The set screw that holds the old part in place locks up and/or breaks off, in which case you have to either drill out the old screw or resort to adhesives. After several attempts to remove the screw he ad and shaft unsuccessfully, I ended up using loc-tite to hold the electrode in place. All this was done from beneath the burner by popping the range top up and propping it with a board. Tricky to put back too.
0 of 1 people found this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
  • 1

Model Compatibility

This part works with the following models:
Fix Number: FIX436633
Manufacturer Part Number: 316011200
Brand
Model Number
Description
Tappan
07
Range - Tappan Range/Stove/Oven 30-2272-00 07
Tappan
14-3083-00-01
Cooktop - Gas
Tappan
14-3083-08-01
Cooktop - Gas
Tappan
14-3083-18-01
Cooktop - Gas
Tappan
14-3083-23-01
Cooktop - Gas
Tappan
14-3093-00-01
Cooktop - Gas
Frigidaire
2343-87A
Range - GAS RANGE
Frigidaire
2823
Range - GAS RANGE
Frigidaire
2823-80B
Range - GAS RANGE
Frigidaire
283440A
Range - GAS RANGE
Frigidaire
283440B
Range - GAS RANGE
Frigidaire
283440C
Range - FRIGIDAIRE GAS RANGE
Frigidaire
283440D
Range - GAS RANGE
Frigidaire
283447B
Range - GAS RANGE
Frigidaire
283447C
Range - FRIGIDAIRE GAS RANGE
Frigidaire
283447D
Range - GAS RANGE
Frigidaire
283460B
Range - GAS RANGE
Frigidaire
283460C
Range - GAS RANGE
Frigidaire
283467B
Range - GAS RANGE
Frigidaire
283467C
Range - GAS RANGE
Frigidaire
28364
Range - GAS RANGE
Frigidaire
2843-80A
Range - GAS RANGE
Frigidaire
2843-80B
Range - GAS RANGE
Frigidaire
2843-80C
Range - GAS RANGE
Frigidaire
2853
Range - GAS RANGE
Frigidaire
28564
Range - FRIGIDAIRE GAS RANGE
Frigidaire
285640A
Range - FRIGIDAIRE GAS RANGE
Frigidaire
285640B
Range - GAS RANGE
Frigidaire
285640D
Range - GAS RANGE
Frigidaire
285640E
Range - GAS RANGE