Some of the parts we sell are eligible for mail-in rebates since we can recycle them. We will display any applicable rebates in your shopping cart. To redeem your rebate, contact Customer Service after you have received your part.
Carryover Tube W/ Cotter Pin G614-0095-W1A
$3.99
In Stock
- Fix Number:
- FIX10295891
- Manufacturer #:
- G614-0095-W1A
- Manufactured by:
- Char-Broil
- Product Description
- This is a carryover tube assembly for a gas grill, which includes one carryover tube and two cotter pins. The carryover tube is what carries the gas and flame from one tube to the next. Unfortunately, it can start to rust, weaken, or warp over time and will need to get replaced.
- Works with the following brands:
- Char-Broil
- Works with the following products
- Grill
Product Description
This is a carryover tube assembly for a gas grill, which includes one carryover tube and two cotter pins. The carryover tube is what carries the gas and flame from one tube to the next. Unfortunately, it can start to rust, weaken, or warp over time and will need to get replaced.
-
Works with the following brands:Char-Broil
-
Works with the following products:Grill
Questions and Answers
We're sorry, but our Q&A experts are temporarily unavailable.
Please check back later if you still haven't found the answer you need.
- < Prev
- 1
- Next >
Sort by:
Search filter:
Clear Filter
Your search term must have 3 or more characters.
Keep searches simple. Use keywords, e.g. "leaking", "pump", "broken" or "fit".
Sorry, we couldn't find any existing answers that matched.
Try using some different or simpler keywords, or submit your new question by using the "Ask a Question" button above!
Try using some different or simpler keywords, or submit your new question by using the "Ask a Question" button above!
Douglas
January 13, 2022
What is the length
Hello Douglas, Thank you for the question. Tube channel measures 4-9/16" long. The measurement does not include the mounting tabs. If you need help placing an order, customer service is open 7 days a week. Please feel free to give us a call. We look forward to hearing from you!
2 people found this helpful.
Was this helpful?
Thank you for voting!
Bruce
August 13, 2022
Need to find flame carry over tubes for my CharBroil Advantage 4 burner gas grill... None of the tubes that look right appear to be compatible with the model number above???
For model number 463344116
Hi Bruce,
Thank you for your question. The part number listed under your model number for the carry over tube is G651-0068-W1. If you need help placing an order for it, customer service is open 7 days a week and anyone will be happy to assist you. Please feel free to give us a call. We look forward to hearing from you!
Was this helpful?
Thank you for voting!
Cherie
February 18, 2023
I need new gas carry over tube and I can't find one compatible.. please help
For model number 469235851
Hello Cherie, thank you for reaching out. The carry-over tube, part number FIX16503242, will fit your model number 469235815. Please contact us anytime if you require further assistance!
Was this helpful?
Thank you for voting!
Related Parts:
Dominic
July 11, 2023
Looking for crossover tubes to fit my charbroil grill
For model number 463211516
Hi Dominic, thank you for reaching out to Fix. The carryover tube for your model is part number FIX10295800. We hope this helps, good luck with this repair!
Was this helpful?
Thank you for voting!
Related Parts:
Jim
October 11, 2023
Need carry over tube
What is the part #?
Thanks
For model number Charbroil 463344015
Hello Jim, thank you for reaching out. The carry over tube compatible with your model is part number FIX16503242. It carries the flame from a burner to an adjacent burner. Glad to be of help!
Was this helpful?
Thank you for voting!
Related Parts:
Frank
October 19, 2023
Need a carry over tube for thismodel.
For model number 463343015
Hello Frank, thank you for the question. The compatible carry over tube for your model is part number FIX16502870. If you need help placing an order, customer service is open 7 days a week!
Was this helpful?
Thank you for voting!
Related Parts:
Bill
February 18, 2024
Part number for carry over tube
For model number 463347519
Hello Bill, thank you for reaching out. The compatible carry over tube for your model is part number FIX16502985. We hope this helps.
Was this helpful?
Thank you for voting!
Related Parts:
Katy
May 11, 2024
Does this fit my Charbroil
For model number 463342119
Hi Katy, thank you for reaching out. The carryover tube you mentioned does not fit your model. The compatible carryover tube for your model is part number FIX16503242. If you need help placing an order, customer service is open 7 days a week!
Was this helpful?
Thank you for voting!
Related Parts:
Related Parts Additional or alternate parts to consider.
View More
View Less
Installation Instructions Provided by Fix customers like you.
- < Prev
- 1
- Next >
Sort by:
Search filter:
Clear Filter
Your search term must have 3 or more characters.
Keep searches simple. Use keywords, e.g. "leaking", "pump", "broken" or "fit".
Sorry, we couldn't find any existing installation instruction that matched.
- Customer:
- Ryan from CATONSVILLE, MD
- Parts Used:
- G614-0095-W1A, 80029717, G455-0013-W1, G455-0012-W1, G455-0009-W1, G350-4400-W1A
- Difficulty Level:
- Easy
- Total Repair Time:
- 30 - 60 mins
- Tools:
- Pliers, Screw drivers
Rusted burners, flame tamers, grease tray, and grease tray rails
Verified propane tank was off, then disconnected.
Opened grill and removed grill grates.
Disposed of rusted heat tents / flame tamers.
Used pliers to help remove cotter pins for carryover tubes and end of burner tubes.
Removed and disposed of rusted carryover tubes.
Used small, thin f ... Read more lat head screwdriver to remove electrode clips from front of burner tubes.
With gentle force, lifted rusted flat end of burner tubes to clear posts then gently moved burner tube away from the front of the grill until no longer inside the holes with the gas feeder tube.
Cleaned up all debris from inside the fire box.
Installed new burner tubes: clipped electrode onto the tube at same location as original burner tubes, ensure threaded cotter pin post hole faces up, insert round end with three rows of small holes on the burner into the fire box hole aligned with a control knob at the front of the fire box and onto the gas feeder inside, crimped end of the burner installed onto the post at the back of the fire box & secured with new cotter pin, installed cotter pin post into threaded hole on top of burner tube - finger tight only.
Installed new carryover tubes: with carryover tube flange facing towards the control knobs, install carryover tubes into adjoining burner tubes' cotter pin posts starting with the leftmost carryover tube. Secure left side of carryover tube with a new cotter pin, install the next carryover tube, then secure its left side with a new cotter pin. Repeat until all carryover tubes are installed and install the final cotter pin. Leave the cotter pin post a little loose when starting to ensure its hole is up high enough to install the cotter pin. Once the pin is installed, tighten cotter pin post to secure.
Removed rusted grease tray and disposed.
Removed rusted grease tray rails: removed single screw securing grease tray rail from inside cart below the control knobs & retain, slide far tab of grease tray rail out of slot at the back of the cart
Installed new grease tray rails: inserted tabbed end of grease tray rail into slot at the back of the cart, secured with retained screw into hole inside cart below the control knobs
Installed new grease tray into slot from behind the grill
Tested new burner tubes: reconnected propane tank, turned on, held igniter switch in to hear spark, and turned on each control knob in turn until each burner lit
After successful test and let them burn for a couple minutes, turned off control knobs and turned off propane tank.
Installed new flame tamers over each burner tube, each rested on their spots in the fire box.
Reinstalled grill grates after cleaning them.
Opened grill and removed grill grates.
Disposed of rusted heat tents / flame tamers.
Used pliers to help remove cotter pins for carryover tubes and end of burner tubes.
Removed and disposed of rusted carryover tubes.
Used small, thin f ... Read more lat head screwdriver to remove electrode clips from front of burner tubes.
With gentle force, lifted rusted flat end of burner tubes to clear posts then gently moved burner tube away from the front of the grill until no longer inside the holes with the gas feeder tube.
Cleaned up all debris from inside the fire box.
Installed new burner tubes: clipped electrode onto the tube at same location as original burner tubes, ensure threaded cotter pin post hole faces up, insert round end with three rows of small holes on the burner into the fire box hole aligned with a control knob at the front of the fire box and onto the gas feeder inside, crimped end of the burner installed onto the post at the back of the fire box & secured with new cotter pin, installed cotter pin post into threaded hole on top of burner tube - finger tight only.
Installed new carryover tubes: with carryover tube flange facing towards the control knobs, install carryover tubes into adjoining burner tubes' cotter pin posts starting with the leftmost carryover tube. Secure left side of carryover tube with a new cotter pin, install the next carryover tube, then secure its left side with a new cotter pin. Repeat until all carryover tubes are installed and install the final cotter pin. Leave the cotter pin post a little loose when starting to ensure its hole is up high enough to install the cotter pin. Once the pin is installed, tighten cotter pin post to secure.
Removed rusted grease tray and disposed.
Removed rusted grease tray rails: removed single screw securing grease tray rail from inside cart below the control knobs & retain, slide far tab of grease tray rail out of slot at the back of the cart
Installed new grease tray rails: inserted tabbed end of grease tray rail into slot at the back of the cart, secured with retained screw into hole inside cart below the control knobs
Installed new grease tray into slot from behind the grill
Tested new burner tubes: reconnected propane tank, turned on, held igniter switch in to hear spark, and turned on each control knob in turn until each burner lit
After successful test and let them burn for a couple minutes, turned off control knobs and turned off propane tank.
Installed new flame tamers over each burner tube, each rested on their spots in the fire box.
Reinstalled grill grates after cleaning them.
Read less
5 of 6 people
found this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
- < Prev
- 1
- Next >
★
Customer Reviews
Filter By Rating:
- < Prev
- 1
- Next >
Sort by:
Search filter:
Clear Filter
Your search term must have 3 or more characters.
Keep searches simple. Use keywords, e.g. "leaking", "pump", "broken" or "fit".
Sorry, we couldn't find any existing reviews that matched. Try using some different or simpler keywords.
Richard N - May 18, 2023
Verified Purchase
Wrong tube for charbroil perfomance
The distance between the pins is 4 1/2 "
Model Compatibility
This part works with the following models:
Fix Number: FIX10295891
Manufacturer Part Number: G614-0095-W1A
Manufacturer Part Number: G614-0095-W1A
Brand
Model Number
Description
✖
Mail-In Recycling Rebate