Part Location Diagram of 134190200 Frigidaire Water Inlet Valve
See part 41 in the diagram
Replacing your Frigidaire Washer Water Inlet Valve
( Grid squares measure 1x1 inch )

Water Inlet Valve 134190200

Rated by 6 customers 

?

Really Easy 

30 - 60 mins 

Ratings submitted by customers like you who bought this part.

?
$127.53
In Stock
Fix Number:
FIX815509
Manufacturer #:
134190200
Manufactured by:
Frigidaire

Product Description

This washing machine water inlet valve has two ports for water to enter.

Videos For installing this part.

Replacing your Water Inlet Valve

Replacing your Water Inlet Valve

Questions and Answers

We're sorry, but our Q&A experts are temporarily unavailable.
Please check back later if you still haven't found the answer you need.

Affresh Washing Machine Cleaner - 3 pack
$12.58
In Stock
Produce Preserver Filter
$21.50
In Stock
Affresh Dishwasher Cleaner Tablets - 6
$19.09
In Stock
Cooktop Cleaning Cream
$15.57
In Stock
Cooktop Cleaner
$17.74
In Stock
Affresh Cleaner
$19.09
In Stock

Installation Instructions Provided by Fix customers like you.

Average Repair Rating: 4.0 / 5.0, 6 reviews.
  • 1
Sort by:
Sorry, we couldn't find any existing installation instruction that matched.
Customer:
Yvonne from East Greenbush, NY
Parts Used:
134190200
Difficulty Level:
Easy
Total Repair Time:
30 - 60 mins
Tools:
Pliers, Screw drivers, Wrench (Adjustable)
Washer did not dispense cold water
lift the top of the washer and remove three hoses connected to the water valve. Disconnect both sets of wires on the water valve and remove the two screws holding it in place. Insert new water valve, screw into place, replace wires and hoses. Most difficult part of the process was removing the top hose because the ends of the clamp hold ing it in place were extremely small.
5 of 5 people found this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
Customer:
ANGELA from LOUISVILLE, KY
Parts Used:
134190200
Difficulty Level:
Very Easy
Total Repair Time:
30 - 60 mins
Tools:
Pliers, Screw drivers
Previous owner reported machine was not letting in water
I bought a the matching dryer for $100 and the previous owners gave me the washer for FREE because it suddenly quit filling with water. I You Tubed and Googled and came to This site. The website futher confirmed the washer most likely needed a water inlet valve. Ordered and received quickly. 1. Unscrewed the back panel. 2. Unscrewed t he water inlet valve. 3. disconnected the hot/cold plug ins. 4. used pliers to squeeze the wire hose clamp and twisted off the hose from the valve. 5. Reconnected everything and hooked up the machine. One thing is we possibly found there may be a short in the front wash select knob. But the washer is up and running. I am a 51 yr old single grandparent raising a grandson. I got a free washer and my brainstorming saved me a fortune. Thanks !
1 person found this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
Customer:
Sandra from Woodville, OH
Parts Used:
134190200
Difficulty Level:
Easy
Total Repair Time:
15 - 30 mins
Tools:
Pliers, Screw drivers
Washer would not stop filling
We followed the instructions that were given on your web site and also watched the video. Both were very helpful. The repair went pretty smoothly.
0 of 1 people found this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
Customer:
donald from cleveland, OH
Parts Used:
134190200
Difficulty Level:
Really Easy
Total Repair Time:
15 - 30 mins
Tools:
Pliers, Screw drivers
no cold water
unplug washer /turn off and disconnect water supply hoses / gently pry top of washer open /unhook top hose and electrical connection from water inlet valve / remove 2 screws next to valve on back of washer / install in reverse order
0 of 1 people found this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
Customer:
karen from Lake View, NY
Parts Used:
131763256, 134190200
Difficulty Level:
Easy
Total Repair Time:
30 - 60 mins
Tools:
Pliers, Screw drivers
front load washer would start to wash then stop agitating.
We followed video instructions provided by this site repair for the water inlet valve. We continued with door lock assembly by working through top of machine instead of taking off rubber seal. This was an option that video suggested but did not show. Washer was repaired and is now working just fine. Thank you for providing video.
0 of 1 people found this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
Customer:
Tony from Santa Barbara, CA
Parts Used:
134190200
Difficulty Level:
Very Easy
Total Repair Time:
15 - 30 mins
Tools:
Pliers, Screw drivers
Broken hot cold water Omer.
Turn off water to washer, remove hot cold hoses. Remove 4 screws in back of washer. Slide top forward. Remove top of washer. Remove 2 sensor plugs and black inlet hose. Remove 2 screws holding valve and replace it with the new one. Reverse instructions above to finish.
0 of 1 people found this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
  • 1

Model Compatibility

This part works with the following models:
Fix Number: FIX815509
Manufacturer Part Number: 134190200
Brand
Model Number
Description
Frigidaire
38712
Washer - WASHER
Frigidaire
38802
Washer - WASHER
Kenmore
41724182300
Washer
Kenmore
41724182301
Washer
Kenmore
41727182700
Washer
Kenmore
41729022890
Washer
Kenmore
41729042990
Washer
Kenmore
41729042991
Washer
Kenmore
41729042992
Washer
Kenmore
41729052990
Washer
Kenmore
41729052991
Washer
Frigidaire
41739012890
Washer - Stackable
Frigidaire
41739012891
Washer
Frigidaire
41739022890
Washer
Frigidaire
41739022891
Washer
Kenmore
41740032990
Washer
Kenmore
41740042990
Washer
Kenmore
41740052990
Washer
Kenmore
41740142000
Washer
Kenmore
41741042000
Washer
Kenmore
41741052000
Washer
Kenmore
41741142000
Washer
Kenmore
41742042100
Washer
Kenmore
41742052100
Washer
Kenmore
41742142100
Washer
Kenmore
41743042200
Washer
Kenmore
41743042300
Washer
Kenmore
41743052200
Washer
Kenmore
41743142200
Washer
Kenmore
41743142300
Washer