Part Location Diagram of 5303935066 Frigidaire Flat Style Oven Igniter
See part 8 in the diagram
( Grid squares measure 1x1 inch )

Flat Style Oven Igniter 5303935066

Rated by 30 customers 

?

Really Easy 

15 - 30 mins 

Ratings submitted by customers like you who bought this part.

?
$35.83
In Stock
Fix Number:
FIX470129
Manufacturer #:
5303935066
Manufactured by:
Frigidaire

Product Description

If your gas range will not heat up, is not coming up to temperature, the igniter is not glowing, or it glows but will not light, you may need to replace the igniter. This part is a genuine OEM flat style oven igniter and includes two ceramic wire nuts to assist with installation. The igniter is used to light the oven burner in your range by igniting the gas. Before beginning this repair, please be sure to disconnect the power and gas supply to your range. When handling this part, be careful not to touch the black element on the igniter, as this section is very fragile. The igniter measures approximately 3.72 inches in length, with 18 inches of wire lead, and has an amperage range of 3.2 to 3.6.

Questions and Answers

We're sorry, but our Q&A experts are temporarily unavailable.
Please check back later if you still haven't found the answer you need.

Affresh Washing Machine Cleaner - 3 pack
$12.58
In Stock
Produce Preserver Filter
$21.50
In Stock
Affresh Dishwasher Cleaner Tablets - 6
$19.09
In Stock
Cooktop Cleaning Cream
$15.57
In Stock
Cooktop Cleaner
$17.74
In Stock
Affresh Cleaner
$19.09
In Stock

Installation Instructions Provided by Fix customers like you.

Average Repair Rating: 3.9 / 5.0, 30 reviews.
  • 1
  • 2
  • 3
Sort by:
Sorry, we couldn't find any existing installation instruction that matched.
Customer:
Daniel from Birdsboro, PA
Parts Used:
5303935066
Difficulty Level:
Really Easy
Total Repair Time:
30 - 60 mins
Tools:
Screw drivers, Socket set
Oven would not heat.
Checked the top burners and broiler operation, they worked. Checked amp. draw for the oven igniter. Low, even though it was glowing. Replace igniter and rechecked oven operation, ok. The oven burner now works.
4 of 4 people found this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
Customer:
Mary from Ticonderoga, NY
Parts Used:
5303935066
Difficulty Level:
Really Easy
Total Repair Time:
Less than 15 mins
Tools:
Screw drivers
When turning on the oven, it would not ignite.
Unplug the power.Took off the broiler door . Reached in , unscrewed the two screws holding the igniter (one screw was stripped so that gave me a little problem) put on the new igniter. Stripped the wires & put the caps on. Plugged back in the stove & worked great.
4 of 4 people found this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
Customer:
SHAWN from PITTSBURGH, PA
Parts Used:
5303935066
Difficulty Level:
Easy
Total Repair Time:
30 - 60 mins
Tools:
Nutdriver, Pliers
Igniter lighting but stove not lighting
I removed the old one and cut the wires on it. Spliced the wire so the new one and attached It. Very simple.
1 person found this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
Customer:
Robert from Beckley, WV
Parts Used:
5303935066
Difficulty Level:
Really Easy
Total Repair Time:
15 - 30 mins
Tools:
Screw drivers, Socket set
Oven wouldn't heat/took long time to heat
The repair is straight forward, make sure to turn off the gas and power to the stove. First, you will remove the shield(s) in the bottom of your oven, first with a flathead screwdriver with the two screws in the far back. Then there is a center nut and 3 screws on the next shield, my advice here is to get a 1/4" socket because they have a odd sized square hole in the middle and are not metric. After removing that shield it exposes the flat style oven igniter, it has two screws holding it in that are also 1/4". After removing the screws from the igniter, remove the broiler pan and tip the oven back against the wall behind it. Cut the appropriate wires and twist the wires from the new igniter onto them using the provided wire caps. Then just put the oven back on the floor and screw everything into place...This repair should really take less than 15 minutes even for a novice but I spent longer than I should have trying to make an adjustable wrench work when I should have just got the 1/4" socket.
1 person found this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
Customer:
Joel from Boyne City, MI
Parts Used:
5303935066
Difficulty Level:
Really Easy
Total Repair Time:
15 - 30 mins
Tools:
Screw drivers, Socket set
Gas oven did not heat up
Unplug stove from wall , removed inside bottom of stove and the heating plate. Then removed the igniter. Had to save the plug and splice the connectors to new igniter and re-installed the new igniter. Plugged oven back in to wall. Oven works great! Very simple repair.
1 person found this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
Customer:
Jerry from Portland, TN
Parts Used:
5303935066
Difficulty Level:
Very Easy
Total Repair Time:
Less than 15 mins
Tools:
Nutdriver
Gas oven would not light
Removed oven door, racks, & bottom pan. Removed the 2 bolts holding the bad ignitor & 2 wires. Installed new ignitor, very easy to do. Oven lit right up.
1 person found this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
Customer:
Jorge from El Paso, TX
Parts Used:
5303935066
Difficulty Level:
Really Easy
Total Repair Time:
15 - 30 mins
Tools:
Pliers, Socket set
Oven igniter would lite... Oven would no heat...Gas flame was not visable
Took off racks, oven covers, and heat shield. Cut one wire at a time ensuring I remembered what wire went where. Spliced the wire together and re-connected everything else. Works better then before, preheats in 8mins to 350 degrees.
0 of 1 people found this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
Customer:
thomas from Staten Island, NY
Parts Used:
5303935066
Difficulty Level:
Very Easy
Total Repair Time:
15 - 30 mins
Tools:
Nutdriver, Pliers
oven would not fire up
watch their vitio replaced oven igniter
0 of 1 people found this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
Customer:
Kathryn from Sherman Oaks, CA
Parts Used:
5303935066
Difficulty Level:
Really Easy
Total Repair Time:
15 - 30 mins
Tools:
Nutdriver
Oven finally failed to ignite at end of period of irratic and longer periods of slow ignition
Removed oven grills and oven bottom floor plate secured by two thumb screw bolts at rear of plate which exposed v-shaped iron plate covering the igniter and the gas emitter pipe. Remove the iron plate secured by a single 5/16" nut. Disconnected igniter from mount with nut driver and followed connection instructions enclosed with igniter for attaching the two wire connectors.
0 of 1 people found this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
Customer:
Allen from Bryan, TX
Parts Used:
5303935066
Difficulty Level:
Easy
Total Repair Time:
30 - 60 mins
Tools:
Wrench (Adjustable)
Oven and Broiler would not work
I narrowed the problem down to the three major components that would cause the problem and after doing research on the Frigidaire web site, I saw that the igniter had the highest percentage of failure, and would resolve the issue 97% of the time. I ordered a replacement and it was here in 2 days (outstanding service!!!!) I read the other posted replacement steps and decided that I could do it the same way with one small difference: I removed the oven "floor" plate and the broiler drawer which gave me unhindered access the the part I needed to replace. I unplugged the oven and after cutting the leads of the new Igniter to length, stripping the insulation back to expose the wires, I used the supplied ceramic barrel nuts to join the 2 wires, made sure there wouldn't be any issues with the routing, reassembled the oven floor plate and broiler drawer, plugged the appliance back in, and tested. Success, it now works great and I saved a lot of money over having to buy a new oven !!!
0 of 1 people found this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
  • 1
  • 2
  • 3

Model Compatibility

This part works with the following models:
Fix Number: FIX470129
Manufacturer Part Number: 5303935066
Brand
Model Number
Description
Tappan
01
Range - Tappan Range/Stove/Oven 30-3858-10 01
Tappan
07
Range - Tappan Range/Stove/Oven 30-2272-00 07
Kenmore
1197028510
Range
Kenmore
1197028710
Range
Kenmore
1197028810
Range
Kenmore
1197028811
Range
Kenmore
1197028812
Range
Kenmore
1197028881
Range
Kenmore
1197028882
Range
Kenmore
1197038510
Range
Kenmore
1197038710
Range
Kenmore
1197038810
Range
Kenmore
1197038812
Range
Kenmore
1197038813
Range
Kenmore
1197038882
Range
Kenmore
1197038883
Range
Kenmore
1197048510
Range
Kenmore
1197048710
Range
Kenmore
1197048810
Range
Kenmore
1197048811
Range
Kenmore
1197048812
Range
Kenmore
1197048881
Range
Kenmore
1197048882
Range
Kenmore
1197058510
Range
Kenmore
1197058710
Range
Kenmore
1197058810
Range
Kenmore
1197058812
Range
Kenmore
1197058813
Range
Kenmore
1197058882
Range
Kenmore
1197058883
Range