Some of the parts we sell are eligible for mail-in rebates since we can recycle them. We will display any applicable rebates in your shopping cart. To redeem your rebate, contact Customer Service after you have received your part.
Wheel Assembly - Kit of 2 882688
$26.14
In Stock
- Fix Number:
- FIX398587
- Manufacturer #:
- 882688
- Manufactured by:
- Whirlpool
- Product Description
- This is an OEM part sourced directly from the manufacturer. This wheel assembly kit is for use with trash compactors. The kit included two wheel bearings. These bearings allow the container drawer to slide out of the compactor with ease. There is one installed on each sides of the compactor, located at the base of the frame. Before repairing your appliance make sure it is unplugged.
- Works with the following brands:
- Kenmore, Whirlpool, KitchenAid, Jenn-Air
- Works with the following products
- Trash Compactor
- Fixes the following symptoms
- Drawer is hard to open and or close
- Part# 882688 replaces these:
- AP3122985, 735282, 11000002, 11000002K, 14212349, 4153788, 4154198, 4163391, 7-49037, 7-76262, 749037, 776262, 882688, Y776262
Part Number Cross Reference
Product Description
This is an OEM part sourced directly from the manufacturer. This wheel assembly kit is for use with trash compactors. The kit included two wheel bearings. These bearings allow the container drawer to slide out of the compactor with ease. There is one installed on each sides of the compactor, located at the base of the frame. Before repairing your appliance make sure it is unplugged.
-
Works with the following brands:Kenmore, Whirlpool, KitchenAid, Jenn-Air
-
Works with the following products:Trash Compactor
-
Fixes the following symptoms:Drawer is hard to open and or close
-
Part# 882688 replaces these:AP3122985, 735282, 11000002, 11000002K, 14212349, 4153788 ... Show more , 4154198, 4163391, 7-49037, 7-76262, 749037, 776262, 882688, Y776262 Show less
Questions and Answers
We're sorry, but our Q&A experts are temporarily unavailable.
Please check back later if you still haven't found the answer you need.
Related Parts Additional or alternate parts to consider.
View More
View Less
Installation Instructions Provided by Fix customers like you.
- < Prev
- 1
- Next >
Sort by:
Search filter:
Clear Filter
Your search term must have 3 or more characters.
Keep searches simple. Use keywords, e.g. "leaking", "pump", "broken" or "fit".
Sorry, we couldn't find any existing installation instruction that matched.
- Customer:
- Robert from Elm City, NC
- Parts Used:
- 882688
- Difficulty Level:
- Easy
- Total Repair Time:
- 15 - 30 mins
- Tools:
- Pliers, Screw drivers, Wrench set
Nylon bearing cover had worn off making compactor drawer difficult to close.
Removed 1 screw on each runner (Left & Right) then tilted up out of the way. Removed old rollers by removing the nut on the back of the bearing axle. Breaking the small metal tab on each side with pliers. I inserted the threaded shafts with the base rotated 90°, held the nut with a magnet until I got the shaft threaded, then tightened
... Read more
the nut as tight as I could with 2 fingers. I then rotated the nylon mount with a set of channel locks until the nylon tab was straight down and lock into position. I finished tightening the nut with an open end wrench. I found this easier than driving the nylon mount in from the bottom with a hammer and drift punch.
Read less
1 person
found this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
The bar that the rollers fit into has a lip on the front.
The lip on the front of the bar had to be bent so it was almost straight out so a wrench could be put on the nut to remove the old roller. There was not room enough to get on the nut with pliers or wrench and turn it. much more difficult than the instructions laid out.
1 person
found this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
Trash Compactor the drawer was very hard to open
In replacing the old partial rusted drawer slides had rusted screw with nuts that spun had to drill them out and replaced front larger bolt and nut the rear screw used a larger sheet metal screw. The wheels and bearing with on easy the instructions showed a modification to remove a tab for the different wheel assembly and installed just
... Read more
like the instructions. When done the drawer will slide out with just touch of your foot on open tab GREAT!! I was looking at buying a new compactor the repair saved me about 700 $. Thanks a lot. Never had a trash Compactor before this great and it keeps my puppy out of trash.
Read less
1 of 4 people
found this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
- < Prev
- 1
- Next >
Model Compatibility
This part works with the following models:
Fix Number: FIX398587
Manufacturer Part Number: 882688
Manufacturer Part Number: 882688
Brand
Model Number
Description
✖
Mail-In Recycling Rebate