Some of the parts we sell are eligible for mail-in rebates since we can recycle them. We will display any applicable rebates in your shopping cart. To redeem your rebate, contact Customer Service after you have received your part.
Dispenser Door Recess Crank WR17X10706
Works With Model GCE21XGYCFLS!
$13.87
In Stock
- Fix Number:
- FIX291908
- Manufacturer #:
- WR17X10706
- Manufactured by:
- GE
Works With Model GCE21XGYCFLS!
- Product Description
- The door recess crank for your refrigerator is located inside the water dispenser assembly. To access this part, you will need to take apart the dispenser assembly. To do this, you will need a putty knife and a Phillips screwdriver. If your dispenser door will not close properly, or ice is not dispensing properly, you may have a damaged door recess crank. This part is made of white plastic and is sold individually.
- Works with the following brands:
- General Electric, Hotpoint
- Works with the following products
- Refrigerator
- Fixes the following symptoms
- Door Sweating, Ice maker won’t dispense ice, Door won’t open or close, Frost buildup
- Part# WR17X10706 replaces these:
- AP3185409, 913457
Part Number Cross Reference
Product Description
The door recess crank for your refrigerator is located inside the water dispenser assembly. To access this part, you will need to take apart the dispenser assembly. To do this, you will need a putty knife and a Phillips screwdriver. If your dispenser door will not close properly, or ice is not dispensing properly, you may have a damaged door recess crank. This part is made of white plastic and is sold individually.
-
Works with the following brands:General Electric, Hotpoint
-
Works with the following products:Refrigerator
-
Fixes the following symptoms:Door Sweating, Ice maker won’t dispense ice, Door won’t open or close, Frost buildup
-
Part# WR17X10706 replaces these:AP3185409, 913457
Videos For installing this part.
Replacing your Dispenser Door Recess Crank
Questions and Answers
We're sorry, but our Q&A experts are temporarily unavailable.
Please check back later if you still haven't found the answer you need.
Related Parts Additional or alternate parts to consider.
View More
View Less
Installation Instructions Provided by Fix customers like you.
- < Prev
- 1
- Next >
Sort by:
Search filter:
Clear Filter
Your search term must have 3 or more characters.
Keep searches simple. Use keywords, e.g. "leaking", "pump", "broken" or "fit".
Sorry, we couldn't find any existing installation instruction that matched.
- Customer:
- Malcolm from St Petersburg, FL
- Parts Used:
- WR49X10233, WR62X10055, WR17X11653, WR17X10706, WR02X10585
- Difficulty Level:
- Really Easy
- Total Repair Time:
- 15 - 30 mins
- Tools:
- Screw drivers
flapper not working
Ordered parts, watched video. That easy. The best parts company I ever ordered from. Each part had a video to help you uninstall, repair and reinstall. coul;d'nt be any easier.
1 person
found this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
- Customer:
- Klark from Orlando, FL
- Parts Used:
- WR62X10055, WR17X11653, WR17X10706, WR02X10585
- Difficulty Level:
- Very Easy
- Total Repair Time:
- 15 - 30 mins
- Tools:
- Pliers, Screw drivers
Freezer door flap would not close from the ice dispenser and the door would collect a block of solid ice.
Follow the installation videos they have on their website and it's very easy to replace all of these parts. Only issue I had was the top screw on the selenoid had rusted in place and instead of trying to get it out I simply wiggled the old part out, and wiggled the new one in its place. It worked great. My model has black shiny plastic i
... Read more
nserts for the freezer and refrigerator door and it is easier to take the top trim molding off the freezer door to slide out the decorative plastic which allows you to pop the frame around the icemaker out much easier. Careful not to break clips on the decorative trim.
Read less
0 of 1 people
found this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
- Customer:
- george from miami, FL
- Parts Used:
- WR62X10055, WR17X11653, WR17X10706, WR02X10585
- Difficulty Level:
- Easy
- Total Repair Time:
- 1- 2 hours
- Tools:
- Screw drivers
the ice door was not closing
I followed the videos that you guys had on the internet step by step which made the job of installation easy.
0 of 1 people
found this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
- Customer:
- Robert from Auburn, WA
- Parts Used:
- WR62X10055, WR17X11653, WR17X10706
- Difficulty Level:
- Really Easy
- Total Repair Time:
- 15 - 30 mins
- Tools:
- Screw drivers
Icing problem in freezer compartment, and water draining into catch pan in door recess.
(1)Remove plastic bezel trim plate surrounding in-door service recess. (2)Remove lower screw that holds motherboard in place. (3)Remove motherboard and wiring clip harnesses x 3. (4)Remove x3 retaining screws that anchor door flap seleniod. (5)Remove seleniod action pin and retaining crank arm w/flap. (6)Reassemble in opposite format wit
... Read more
h new components. Easy peasy lemon sqeezey...
Read less
0 of 1 people
found this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
- Customer:
- David from Rumford, RI
- Parts Used:
- WR62X10055, WR17X11653, WR17X10706, WR02X10585
- Difficulty Level:
- Really Easy
- Total Repair Time:
- 30 - 60 mins
- Tools:
- Screw drivers
Ice maker Door would not Close
I watched the U Tube and followed the Instructions. We found a Lot of Mold around the Door, & Rust around the Door Solenoid. Be careful when removing the Outer plastic Frame and Push button panel..
0 of 1 people
found this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
- Customer:
- peter from bayville, NJ
- Parts Used:
- WR62X10055, WR17X11653, WR17X10706, WR02X10585
- Difficulty Level:
- Really Easy
- Total Repair Time:
- 15 - 30 mins
- Tools:
- Screw drivers
flapper was stuck open forming ice build up
I folllowed your excellent video had no problem also parts were order 2am friday I received them saturday at 1pm.(great service)
0 of 1 people
found this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
- Customer:
- Robert from Tampa, FL
- Parts Used:
- WR62X10055, WR17X11653, WR17X10706, WR02X10585
- Difficulty Level:
- Really Easy
- Total Repair Time:
- 15 - 30 mins
- Tools:
- Screw drivers
The in-door ice maker flapper door had stopped opening to allow ice to fall into the glass
Similar to online videos for other GE in-door models. Unplug. Pull the in-door water/ice control panel out from the bottom, it is a click fit. Unplug the 3 wire harness fittings from the back of the board and set it aside. remove the 4 screws at the corners of the paddle housing and remove. All of the flapper solenoid, door spring and cra
... Read more
nk are now exposed. Remove old solenoid by removing 2 bottom screws and loosening the top screw, then pull it out at the bottom and slide off of upper screw. Remove plunger hanging form door crank. Remove door crank and spring held in by screws. Assemble new flapper onto crank (click fit) and replace crank and spring into door. Hang new solenoid plunger onto crank arm, and reinstall solenoid with 3 screws. Reinstall paddle housing with 4 screws. Reinsert 3 wire harness connecters onto back of control board. Slide control board into recess at the top and click bottom into place.
Read less
0 of 1 people
found this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
- Customer:
- Patrick from St. Pete Beach, FL
- Parts Used:
- WR62X10055, WR17X10706
- Difficulty Level:
- Really Easy
- Total Repair Time:
- 15 - 30 mins
- Tools:
- Screw drivers
Freezer icing up dripping through open ice & water door
From watching a step by step instruction video on YouTube
0 of 1 people
found this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
- < Prev
- 1
- Next >
Model Compatibility
This part works with the following models:
Fix Number: FIX291908
Manufacturer Part Number: WR17X10706
Manufacturer Part Number: WR17X10706
Brand
Model Number
Description
✖
Mail-In Recycling Rebate