Some of the parts we sell are eligible for mail-in rebates since we can recycle them. We will display any applicable rebates in your shopping cart. To redeem your rebate, contact Customer Service after you have received your part.
Recess Door Spring WR02X10585
Works With Model GCE21XGYCFLS!
$9.19
In Stock
- Fix Number:
- FIX285013
- Manufacturer #:
- WR02X10585
- Manufactured by:
- GE
Works With Model GCE21XGYCFLS!
- Product Description
- This door recess spring or dispenser lever spring in your refrigerator is used to return the ice door to the closed position or the dispenser lever to the home position once released. You will find the spring in the water dispenser assembly, behind the main control panel. If the dispenser lever is malfunctioning or the dispenser ice door is not closing, you may need to replace this door recess spring.
- Works with the following brands:
- General Electric, Hotpoint
- Works with the following products
- Refrigerator, Dishwasher
- Fixes the following symptoms
- Door latch failure, Door Sweating, Ice maker won’t dispense ice, Door won’t open or close
- Part# WR02X10585 replaces these:
- AP3670155, 879075, WR2X10585
Part Number Cross Reference
Product Description
This door recess spring or dispenser lever spring in your refrigerator is used to return the ice door to the closed position or the dispenser lever to the home position once released. You will find the spring in the water dispenser assembly, behind the main control panel. If the dispenser lever is malfunctioning or the dispenser ice door is not closing, you may need to replace this door recess spring.
-
Works with the following brands:General Electric, Hotpoint
-
Works with the following products:Refrigerator, Dishwasher
-
Fixes the following symptoms:Door latch failure, Door Sweating, Ice maker won’t dispense ice, Door won’t open or close
-
Part# WR02X10585 replaces these:AP3670155, 879075, WR2X10585
Videos For installing this part.
Replacing your Recess Door Spring
Questions and Answers
We're sorry, but our Q&A experts are temporarily unavailable.
Please check back later if you still haven't found the answer you need.
Related Parts Additional or alternate parts to consider.
View More
View Less
Installation Instructions Provided by Fix customers like you.
- < Prev
- 1
- Next >
Sort by:
Search filter:
Clear Filter
Your search term must have 3 or more characters.
Keep searches simple. Use keywords, e.g. "leaking", "pump", "broken" or "fit".
Sorry, we couldn't find any existing installation instruction that matched.
- Customer:
- Lorraine from Nashwauk, MN
- Parts Used:
- WR17X11653, WR02X10585
- Difficulty Level:
- Really Easy
- Total Repair Time:
- 30 - 60 mins
- Tools:
- Pliers, Screw drivers
Frsot build up and ice not coming out of shoot.
Couldn't get the trim board off, don't waste your time trying to do that. Remove the control panel by inserting screw driver in three holes. Lift up and out. Then you can follow the rest of the video explaining how to get your parts in.
1 person
found this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
- Customer:
- Malcolm from St Petersburg, FL
- Parts Used:
- WR49X10233, WR62X10055, WR17X11653, WR17X10706, WR02X10585
- Difficulty Level:
- Really Easy
- Total Repair Time:
- 15 - 30 mins
- Tools:
- Screw drivers
flapper not working
Ordered parts, watched video. That easy. The best parts company I ever ordered from. Each part had a video to help you uninstall, repair and reinstall. coul;d'nt be any easier.
1 person
found this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
- Customer:
- Klark from Orlando, FL
- Parts Used:
- WR62X10055, WR17X11653, WR17X10706, WR02X10585
- Difficulty Level:
- Very Easy
- Total Repair Time:
- 15 - 30 mins
- Tools:
- Pliers, Screw drivers
Freezer door flap would not close from the ice dispenser and the door would collect a block of solid ice.
Follow the installation videos they have on their website and it's very easy to replace all of these parts. Only issue I had was the top screw on the selenoid had rusted in place and instead of trying to get it out I simply wiggled the old part out, and wiggled the new one in its place. It worked great. My model has black shiny plastic i
... Read more
nserts for the freezer and refrigerator door and it is easier to take the top trim molding off the freezer door to slide out the decorative plastic which allows you to pop the frame around the icemaker out much easier. Careful not to break clips on the decorative trim.
Read less
0 of 1 people
found this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
- Customer:
- Steven from Newark, NY
- Parts Used:
- WR62X10055, WR02X10585
- Difficulty Level:
- Easy
- Total Repair Time:
- 15 - 30 mins
- Tools:
- Screw drivers
door on ice dispenser not closing tightly
Recommend watching the videos by this site which are excellent. Once front panel is removed and access is gained, the few screws removed to replace the door spring and the solenoid is straight forward and easy. Once back together, hearing the dispenser door 'snap' shut was very nice. Also, kudos to this site on how quickly that they
... Read more
shipped the order!
Read less
0 of 1 people
found this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
- Customer:
- george from miami, FL
- Parts Used:
- WR62X10055, WR17X11653, WR17X10706, WR02X10585
- Difficulty Level:
- Easy
- Total Repair Time:
- 1- 2 hours
- Tools:
- Screw drivers
the ice door was not closing
I followed the videos that you guys had on the internet step by step which made the job of installation easy.
0 of 1 people
found this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
- Customer:
- David from Rumford, RI
- Parts Used:
- WR62X10055, WR17X11653, WR17X10706, WR02X10585
- Difficulty Level:
- Really Easy
- Total Repair Time:
- 30 - 60 mins
- Tools:
- Screw drivers
Ice maker Door would not Close
I watched the U Tube and followed the Instructions. We found a Lot of Mold around the Door, & Rust around the Door Solenoid. Be careful when removing the Outer plastic Frame and Push button panel..
0 of 1 people
found this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
- Customer:
- Ron from Montgomery, AL
- Parts Used:
- WD13X10045, WR02X10585
- Difficulty Level:
- Really Easy
- Total Repair Time:
- 15 - 30 mins
- Tools:
- Screw drivers
Broken latch on dishwasher
Due to an injury to my hand, my wife attempted to repair the latch on our dishwasher by watching the video on this site. The only difficulty was in disconnecting the piece that held the control panel to the door. In the video, the guy's arm is in the way so she wasn't sure how to remove the clip that held it in place. The rest of the repa
... Read more
ir went very smoothly and she was very proud of herself for fixing the dishwasher. By the way, the parts arrived here in less than 24 hours.
Read less
0 of 1 people
found this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
- Customer:
- peter from bayville, NJ
- Parts Used:
- WR62X10055, WR17X11653, WR17X10706, WR02X10585
- Difficulty Level:
- Really Easy
- Total Repair Time:
- 15 - 30 mins
- Tools:
- Screw drivers
flapper was stuck open forming ice build up
I folllowed your excellent video had no problem also parts were order 2am friday I received them saturday at 1pm.(great service)
0 of 1 people
found this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
- Customer:
- Robert from Tampa, FL
- Parts Used:
- WR62X10055, WR17X11653, WR17X10706, WR02X10585
- Difficulty Level:
- Really Easy
- Total Repair Time:
- 15 - 30 mins
- Tools:
- Screw drivers
The in-door ice maker flapper door had stopped opening to allow ice to fall into the glass
Similar to online videos for other GE in-door models. Unplug. Pull the in-door water/ice control panel out from the bottom, it is a click fit. Unplug the 3 wire harness fittings from the back of the board and set it aside. remove the 4 screws at the corners of the paddle housing and remove. All of the flapper solenoid, door spring and cra
... Read more
nk are now exposed. Remove old solenoid by removing 2 bottom screws and loosening the top screw, then pull it out at the bottom and slide off of upper screw. Remove plunger hanging form door crank. Remove door crank and spring held in by screws. Assemble new flapper onto crank (click fit) and replace crank and spring into door. Hang new solenoid plunger onto crank arm, and reinstall solenoid with 3 screws. Reinstall paddle housing with 4 screws. Reinsert 3 wire harness connecters onto back of control board. Slide control board into recess at the top and click bottom into place.
Read less
0 of 1 people
found this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
- Customer:
- Michael from Council Bluffs, IA
- Parts Used:
- WR17X11653, WR02X10585
- Difficulty Level:
- Really Easy
- Total Repair Time:
- 30 - 60 mins
- Tools:
- Nutdriver, Screw drivers
Frost buildup in icemaker opening
I tried to follow the video about removing the plate/cover around the dispenser area but to no avail. I broke two of the screws before I ended up removing the inside of the door. After removing the inside of the door the repair went as described in the video except it seemed to be much easier since it was all out in the open and you cou
... Read more
ld see everything clearly. Take care putting the dispenser back in the door, make sure you get the water tube in the right place or you will have to take it apart again to make it right. Easy repair.
Read less
0 of 1 people
found this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
- < Prev
- 1
- Next >
Model Compatibility
This part works with the following models:
Fix Number: FIX285013
Manufacturer Part Number: WR02X10585
Manufacturer Part Number: WR02X10585
Brand
Model Number
Description
✖
Mail-In Recycling Rebate