Some of the parts we sell are eligible for mail-in rebates since we can recycle them. We will display any applicable rebates in your shopping cart. To redeem your rebate, contact Customer Service after you have received your part.
Kit - Repair K10-WAT
- Fix Number:
- FIX10048119
- Manufacturer #:
- K10-WAT
- Manufactured by:
- Walbro
- Product Description
- This is a genuine Walbro replacement part. The carburetor is responsible for regulating the amount of fuel and air that make it to the engine; this ensures the fuel is burning properly in your outdoor power equipment. Over time the carburetor gets dirty and parts begin to wear out, it doesn?t mean you need a new one. This kit gives you all the parts you need to clean and rebuild your carburetor. Signs your carburetor is clogged or dirty and needs to be cleaned are that the engine is not running properly, it is not running at all, it will not stay running, it is difficult to start, or if it emits a lot of smoke. In order to successfully rebuild your carburetor we suggest that as you disassemble the old carburetor pay attention to the order and placement of the parts you are removing, when reassembling reverse the removal order. When you are finished rebuilding the carburetor be sure to inspect all connections before running. Place only a small amount of fuel in the tank while testing the new carburetor. To complete this job you will need a screwdriver and a pick.
- Works with the following brands:
- Walbro, Husqvarna, Poulan
- Works with the following products
- Engine, Trimmer, Chainsaw
Product Description
This is a genuine Walbro replacement part. The carburetor is responsible for regulating the amount of fuel and air that make it to the engine; this ensures the fuel is burning properly in your outdoor power equipment. Over time the carburetor gets dirty and parts begin to wear out, it doesn?t mean you need a new one. This kit gives you all the parts you need to clean and rebuild your carburetor. Signs your carburetor is clogged or dirty and needs to be cleaned are that the engine is not running properly, it is not running at all, it will not stay running, it is difficult to start, or if it emits a lot of smoke. In order to successfully rebuild your carburetor we suggest that as you disassemble the old carburetor pay attention to the order and placement of the parts you are removing, when reassembling reverse the removal order. When you are finished rebuilding the carburetor be sure to inspect all connections before running. Place only a small amount of fuel in the tank while testing the new carburetor. To complete this job you will need a screwdriver and a pick.
-
Works with the following brands:Walbro, Husqvarna, Poulan
-
Works with the following products:Engine, Trimmer, Chainsaw
Questions and Answers
We're sorry, but our Q&A experts are temporarily unavailable.
Please check back later if you still haven't found the answer you need.
Related Parts Additional or alternate parts to consider.
Model Compatibility
Manufacturer Part Number: K10-WAT