Part Location Diagram of LA-1044 Whirlpool Heating Element Kit - 240V 4750W
See part 1 in the diagram
Replacing your Norge Dryer Heating Element Kit - 240V 4750W
( Grid squares measure 1x1 inch )

Heating Element Kit - 240V 4750W LA-1044

★★★★★
★★★★★
1 Review

Rated by 17 customers 

?

Really Easy 

15 - 30 mins 

Ratings submitted by customers like you who bought this part.

?
$78.81
In Stock
Fix Number:
FIX2162280
Manufacturer #:
LA-1044
Manufactured by:
Whirlpool

Product Description

Videos For installing this part.

Replacing your Heating Element Kit - 240V 4750W

Replacing your Heating Element Kit - 240V 4750W

Questions and Answers

We're sorry, but our Q&A experts are temporarily unavailable.
Please check back later if you still haven't found the answer you need.

1 question answered by our experts.
  • 1
Sort by:
Sorry, we couldn't find any existing answers that matched.
Try using some different or simpler keywords, or submit your new question by using the "Ask a Question" button above!
Ron
July 12, 2023
Dryer coil is working at half capacity,IE.,the bottom coil heats up but the top coil is only red at the coil bridges. Continunity has been tested and all is ok.
For model number den202wc
Fix.com logo
Hi Ron, thank you for contacting us. Based on our understanding of the issue, we would suggest you replace the heating element, part number FIX2162280, as it is most likely faulty. Let us know if you have further questions!

Was this helpful?
Thank you for voting!
Affresh Washing Machine Cleaner - 3 pack
$12.58
In Stock
Produce Preserver Filter
$21.50
In Stock
Affresh Dishwasher Cleaner Tablets - 6
$19.09
In Stock
Cooktop Cleaning Cream
$15.57
In Stock
Cooktop Cleaner
$17.74
In Stock
Affresh Cleaner
$19.09
In Stock

Installation Instructions Provided by Fix customers like you.

Average Repair Rating: 4.4 / 5.0, 17 reviews.
  • 1
  • 2
Sort by:
Sorry, we couldn't find any existing installation instruction that matched.
Customer:
CRAIG from DAPHNE, AL
Parts Used:
LA-1044, WP53-1182
Difficulty Level:
Easy
Total Repair Time:
30 - 60 mins
Tools:
Pliers, Screw drivers
would not start
checked continuity on the thermal fuse it was bad ordered new fuse and heat element (dryer is over 10 years old time for new element) took out drum and behind it was heat assy, replaced fuse and element put back together and hit start button worked great
3 of 4 people found this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
Customer:
Michael from monroe, NH
Parts Used:
LA-1044
Difficulty Level:
Really Easy
Total Repair Time:
30 - 60 mins
Tools:
Socket set
no heat
watched video,removed element,found obvious disconnect,ordered part,replaced.
1 person found this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
Customer:
Harry from Columbus, OH
Parts Used:
LA-1044
Difficulty Level:
A Bit Difficult
Total Repair Time:
30 - 60 mins
Tools:
Nutdriver, Pliers
Got the thermostat on backwards
I followed the instruction given but the thing you have to make sure of is that the thermostat is put back on the unit just the way it came off because I did not and had to turn it 180 degrees to get heat
1 person found this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
Customer:
Fred from Alvin, TX
Parts Used:
LA-1044
Difficulty Level:
Really Easy
Total Repair Time:
15 - 30 mins
Tools:
Nutdriver, Pliers
Dryer would run but not heat the air
Watched video on how to do it. Used putty knife to pop catches on dryer cover. Removed wires, noted which went where. Removed high temp thermostat, removed heater element, put in new heater element, put in new high temp thermostat, reconnected wires, closed lid and started dryer. Worked perfectly. I could have done it in less than 15 minutes, but took a little longer as my grandbaby was a welcome distraction. Old heater element had broken and old high temperature thermostat basically fell apart in my hands as it was removed. Highly recommend buying both parts and don't discard the high temperature thermostat and two screws as you need them for the new thermostat. You may have to wiggle the heater element to get it to go in to the space as my element did not just drop in, but it went in easily enough.
1 person found this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
Customer:
Walter from Corunna, MI
Parts Used:
LA-1044
Difficulty Level:
Really Easy
Total Repair Time:
Less than 15 mins
Tools:
Socket set
heating element out
replaced it
1 person found this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
Customer:
Gerald from Hanover, PA
Parts Used:
LA-1044, WP53-1182
Difficulty Level:
Easy
Total Repair Time:
15 - 30 mins
Tools:
Nutdriver
Dryer would not start
I poped the top of the dryer with a flat head screwdriver, used the nutdriver to take out the heating element and the thermal fuses. I checked with Ohm meter and found thermal fuse open. Since the dryer was over 5 years old I decided to replace the heating element kit also. The one connector was real tight, so I used a small pen knife to losen the connection, replaced all connectors in order that they were, re-installed fuse and element (had a tough time keeping the fuse in the correct spot until I colud put the element screw back in, had to hold fuse in place with one hand while starting screw with other), got everything back together put top back on and ran dryer for 10 minutes. Works good as new.
1 person found this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
Customer:
Dennis from Haltom City, TX
Parts Used:
LA-1044
Difficulty Level:
Really Easy
Total Repair Time:
15 - 30 mins
Tools:
Nutdriver
Super easy, and quick
My model the element was under the Timer Controls so no need to disassemble panels, Lift top and remove 3 screws.
0 of 1 people found this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
Customer:
Brenda from Charlotte, NC
Parts Used:
LA-1044
Difficulty Level:
Really Easy
Total Repair Time:
Less than 15 mins
Tools:
Socket set
My clothes dryer suddenly stopped getting hot. The blower was blowing, but the air was not warm.
After googling what the problem could be, I googled the heating element and this site came up. They even had the video showing how to replace the parts....awesome!! My husband was not so sure I could do it (doubter), but I saved us a load of cash by doing it myself! Thanks to this site!! These aren't really instructions, but this site has that covered far better than I could do!! :)
0 of 1 people found this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
Customer:
Jay from Easton, PA
Parts Used:
LA-1044
Difficulty Level:
Very Easy
Total Repair Time:
Less than 15 mins
Tools:
Nutdriver, Pliers
Erratic heating
Video was all I needed for this repair. Be sure your nut-driver has a magnetic screw holder, otherwise be very careful as you remove the screws from back of dryer. Hardest part of the job was removing the sticky bubble wrap from the new heating element, lol.
0 of 1 people found this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
Customer:
Gregg from Lenoir, NC
Parts Used:
LA-1044
Difficulty Level:
Very Easy
Total Repair Time:
Less than 15 mins
Tools:
Nutdriver, Pliers
Burnt-out Heating Element
Followed the provided video's instruction. Piece of cake! This is the second repair I've done using this site (first was replacing the motor in a Maytag Washer). Can't recommend this site enough for the part selection and the great video's that make it sooooo easy to repair appliances.9
0 of 1 people found this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
  • 1
  • 2
Customer Reviews
Average Rating: (1 Review)
5.0
★★★★★
★★★★★
Filter By Rating:
  • 5
    1
  • 4
    0
  • 3
    0
  • 2
    0
  • 1
    0
  • 1
Sort by:
Sorry, we couldn't find any existing reviews that matched. Try using some different or simpler keywords.

Model Compatibility

This part works with the following models:
Fix Number: FIX2162280
Manufacturer Part Number: LA-1044
Brand
Model Number
Description
Norge
7002A
Dryer - DRYER
Norge
7215A
Dryer - ELECTRIC DRYER
Norge
7215A REV A
Dryer - Norge Dryer Model 7215A REV A (7215AREVA) Parts
Norge
7215A REV B
Dryer - Norge Dryer Model 7215A REV B (7215AREVB) Parts
Norge
7215A REV C
Dryer - Norge Dryer Model 7215A REV C (7215AREVC) Parts
Norge
7215A REV D
Dryer - Norge Dryer Model 7215A REV D (7215AREVD) Parts
Norge
7215A REV E
Dryer - Norge Dryer Model 7215A REV E (7215AREVE) Parts
Norge
7215A REV F
Dryer - Norge Dryer Model 7215A REV F (7215AREVF) Parts
Norge
7215A REV G
Dryer - Norge Dryer Model 7215A REV G (7215AREVG) Parts
Norge
7216A
Dryer - ELECTRIC DRYER
Norge
7216A REV A
Dryer - Norge Dryer Model 7216A REV A (7216AREVA) Parts
Norge
7216A REV B
Dryer - Norge Dryer Model 7216A REV B (7216AREVB) Parts
Norge
7216A REV D
Dryer - Norge Dryer Model 7216A REV D (7216AREVD) Parts
Norge
7216A REV E
Dryer - Norge Dryer Model 7216A REV E (7216AREVE) Parts
Norge
7216A REV F
Dryer - Norge Dryer Model 7216A REV F (7216AREVF) Parts
Norge
7368A
Dryer - ELECTRIC DRYER
Norge
7375A
Dryer - ELECTRIC DRYER
Norge
7375A REV A
Dryer - Norge Dryer Model 7375A REV A (7375AREVA) Parts
Norge
7375A REV B
Dryer - Norge Dryer Model 7375A REV B (7375AREVB) Parts
Norge
7375A REV C
Dryer - Norge Dryer Model 7375A REV C (7375AREVC) Parts
Norge
7375A REV D
Dryer - Norge Dryer Model 7375A REV D (7375AREVD) Parts
Norge
7375A REV E
Dryer - Norge Dryer Model 7375A REV E (7375AREVE) Parts
Norge
7375A REV F
Dryer - Norge Dryer Model 7375A REV F (7375AREVF) Parts
Norge
7430A
Dryer - ELECTRIC DRYER
Norge
7430A REV A
Dryer - Norge Dryer Model 7430A REV A (7430AREVA) Parts
Norge
7430A REV B
Dryer - Norge Dryer Model 7430A REV B (7430AREVB) Parts
Norge
7430A REV C
Dryer - Norge Dryer Model 7430A REV C (7430AREVC) Parts
Norge
7430A REV D
Dryer - Norge Dryer Model 7430A REV D (7430AREVD) Parts
Norge
7433A
Dryer - ELECTRIC DRYER
Norge
7433A REV A
Dryer - Norge Dryer Model 7433A REV A (7433AREVA) Parts