Some of the parts we sell are eligible for mail-in rebates since we can recycle them. We will display any applicable rebates in your shopping cart. To redeem your rebate, contact Customer Service after you have received your part.
Thermostat Assembly 6931EL3001E
$34.22
In Stock
- Fix Number:
- FIX3530481
- Manufacturer #:
- 6931EL3001E
- Manufactured by:
- LG
- Product Description
- The high limit thermostat on your dyer prevents your dryer from overheating. When the dryer heats up too much, the high limit thermostat will sense it and automatically shut off the heating element. If the thermostat is malfunctioning, it will need to be replaced, to avoid more serious issues. This product is an OEM part, direct from the manufacturer.
- Works with the following brands:
- LG, General Electric, Kenmore
- Works with the following products
- Dryer, Washer
- Fixes the following symptoms
- Not Heating
- Part# 6931EL3001E replaces these:
- AP4440977, 6931EL3001C, 6931EL3001E
Part Number Cross Reference
Product Description
The high limit thermostat on your dyer prevents your dryer from overheating. When the dryer heats up too much, the high limit thermostat will sense it and automatically shut off the heating element. If the thermostat is malfunctioning, it will need to be replaced, to avoid more serious issues. This product is an OEM part, direct from the manufacturer.
-
Works with the following brands:LG, General Electric, Kenmore
-
Works with the following products:Dryer, Washer
-
Fixes the following symptoms:Not Heating
-
Part# 6931EL3001E replaces these:AP4440977, 6931EL3001C, 6931EL3001E
Questions and Answers
We're sorry, but our Q&A experts are temporarily unavailable.
Please check back later if you still haven't found the answer you need.
Related Parts Additional or alternate parts to consider.
View More
View Less
Installation Instructions Provided by Fix customers like you.
- < Prev
- 1
- Next >
Sort by:
Search filter:
Clear Filter
Your search term must have 3 or more characters.
Keep searches simple. Use keywords, e.g. "leaking", "pump", "broken" or "fit".
Sorry, we couldn't find any existing installation instruction that matched.
- Customer:
- Richard from Harrison, OH
- Parts Used:
- 6931EL3003D, 6931EL3001E
- Difficulty Level:
- Easy
- Total Repair Time:
- 30 - 60 mins
- Tools:
- Screw drivers
No heat
Removed screw holding vent tube, pulled vent tube out. The thermal fuse and thermostat assy are left of inside the hole on the back of the dryer where the vent tube came out. The screws are easy to take out with one hand using a phillips screwdriver. I had to use a long screwdriver because the drum was in the way with a shorter one. The s
... Read more
crews were pretty tight, so use a phillips with a good point, dont want to strip the screws. Because i can only get one hand in there, it was a little tricky getting the new parts lined up and starting the first screws at the same time, that took a little while but I finally got them started. If i couldnt get the first screws started i was goint to cut the bottom holes on the brackets for the parts, start the screw, slip the bracket onto the screw and then start the second screws. I used a magnetic flashlight inside the dryer, could put it in different places to see better in there. I should have put a few layers of masking tape arround the vent hole edge, its pretty sharp and when i was done i realised i had cut my arm on that edge. Dryer works again and dear Wife is happy.. I did test the old parts, thermal fuse was blown, probably because of too much lint in the flexable dryer hose, i shoulda replaced the dryer hose sooner.
Read less
8 of 8 people
found this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
- < Prev
- 1
- Next >
Model Compatibility
This part works with the following models:
Fix Number: FIX3530481
Manufacturer Part Number: 6931EL3001E
Manufacturer Part Number: 6931EL3001E
Brand
Model Number
Description
✖
Mail-In Recycling Rebate