Some of the parts we sell are eligible for mail-in rebates since we can recycle them. We will display any applicable rebates in your shopping cart. To redeem your rebate, contact Customer Service after you have received your part.
Drum Slide WE3X87
Works With Model NJLR473GT0WW!
$21.02
In Stock
- Fix Number:
- FIX267877
- Manufacturer #:
- WE3X87
- Manufactured by:
- GE
Works With Model NJLR473GT0WW!
- Product Description
- This slide is sold individually. Some dryers require up to three of these slides . Be sure to check to make sure you order the necessary amount for your dryer.
- Works with the following brands:
- General Electric, Hotpoint
- Works with the following products
- Dryer
- Fixes the following symptoms
- Noisy, Marks left on clothes
- Part# WE3X87 replaces these:
- AP2042543, 2305, WE03X0076, WE03X0083, WE03X0084, WE03X0087, WE3X76, WE3X83, WE3X84
Part Number Cross Reference
Product Description
This slide is sold individually. Some dryers require up to three of these slides . Be sure to check to make sure you order the necessary amount for your dryer.
-
Works with the following brands:General Electric, Hotpoint
-
Works with the following products:Dryer
-
Fixes the following symptoms:Noisy, Marks left on clothes
-
Part# WE3X87 replaces these:AP2042543, 2305, WE03X0076, WE03X0083, WE03X0084, WE03X0087 ... Show more , WE3X76, WE3X83, WE3X84 Show less
Questions and Answers
We're sorry, but our Q&A experts are temporarily unavailable.
Please check back later if you still haven't found the answer you need.
Related Parts Additional or alternate parts to consider.
View More
View Less
Installation Instructions Provided by Fix customers like you.
- < Prev
- 1
- Next >
Sort by:
Search filter:
Clear Filter
Your search term must have 3 or more characters.
Keep searches simple. Use keywords, e.g. "leaking", "pump", "broken" or "fit".
Sorry, we couldn't find any existing installation instruction that matched.
Loud squeaking sound when dryer was running
Removed the 2 screws at top of open door to access top cover removal. Removed 2 screws at top of front face panel and took front off. Removed dryer tub , replaced bushing and the replaces sliders on front panel.Very easy
0 of 1 people
found this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
Screeching noise from rotating drum
1. Opened door.?
2. Using phillips head screwdriver. Removed two screws holding down top of machine.?
3. Swung machine top lid back. Secure from falling shut.?
4. Disconnect two wires from door switch.?
5. Using socket wrench removed two hex head machine screws holding front panel onto machine.?
6. While reaching ... Read more in through door to hold drum, Swung entire front panel down and away from machine and carefully rested drum on frame.?
7. Removed felt strip from perimeter and set aside. Using flat head screwdriver, pryed worn drum bearing off of front panel. ?
8. Removed Support Spanner (white flexible plastic piece approx 8" x 2") from old drum bearing and put on new drum bearing.?
9. Put new teflon drum slides (this model takes 3) on 3 replacement drum bearings. Had to trim 1/4 inch from one slide.?
10. Snapped new drum bearing in place on front panel.?
11. Reverse step 1-6 above.?TIME: APPROX 30-40 MINUTES.
2. Using phillips head screwdriver. Removed two screws holding down top of machine.?
3. Swung machine top lid back. Secure from falling shut.?
4. Disconnect two wires from door switch.?
5. Using socket wrench removed two hex head machine screws holding front panel onto machine.?
6. While reaching ... Read more in through door to hold drum, Swung entire front panel down and away from machine and carefully rested drum on frame.?
7. Removed felt strip from perimeter and set aside. Using flat head screwdriver, pryed worn drum bearing off of front panel. ?
8. Removed Support Spanner (white flexible plastic piece approx 8" x 2") from old drum bearing and put on new drum bearing.?
9. Put new teflon drum slides (this model takes 3) on 3 replacement drum bearings. Had to trim 1/4 inch from one slide.?
10. Snapped new drum bearing in place on front panel.?
11. Reverse step 1-6 above.?TIME: APPROX 30-40 MINUTES.
Read less
0 of 1 people
found this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
- < Prev
- 1
- Next >
Model Compatibility
This part works with the following models:
Fix Number: FIX267877
Manufacturer Part Number: WE3X87
Manufacturer Part Number: WE3X87
Brand
Model Number
Description
✖
Mail-In Recycling Rebate