Part Location Diagram of WPW10757217 Whirlpool Circulation Pump and Motor
See part 10 in the diagram
Replacing your KitchenAid Dishwasher Circulation Pump and Motor
( Grid squares measure 1x1 inch )

Circulation Pump and Motor WPW10757217

★★★★★
★★★★★
1 Review

Rated by 19 customers 

?

Really Easy 

1- 2 hours 

Ratings submitted by customers like you who bought this part.

?
$222.31
In Stock
Fix Number:
FIX11757388
Manufacturer #:
WPW10757217
Manufactured by:
Whirlpool

Product Description

The part functions by spinning the impeller of the circulation pump, which is used to move the water through the spray arms during the wash cycle.

Videos For installing this part.

Replacing your Circulation Pump and Motor

Replacing your Circulation Pump and Motor

Questions and Answers

We're sorry, but our Q&A experts are temporarily unavailable.
Please check back later if you still haven't found the answer you need.

1 question answered by our experts.
  • 1
Sort by:
Sorry, we couldn't find any existing answers that matched.
Try using some different or simpler keywords, or submit your new question by using the "Ask a Question" button above!
Walter
May 8, 2022
Why can’t the pump be bought separate from the motor? My motor pumps the water out when I hit cancel. It does not work to pump water through the spreaders. I used the pan fills then the timer advances as a click initiates the pumping cycle;however, the pump does not pump water. When I hit the cancel button, the pump drains the pan and runs longer than necessary then quits!
For model number KUDK03ITBL0
Fix.com logo
Hello Walter, Thank you for your inquiry. We are very sorry but the manufacturer only produces the circulation pump for your model with the motor. You can test it will a multimeter to see if it is functioning properly. We would also recommend checking your water inlet valve as well. We hope this helps and if you need help placing an order, customer service is open 7 days a week. Please feel free to give us a call. We look forward to hearing from you!

Was this helpful?
Thank you for voting!
Related Parts:
Affresh Washing Machine Cleaner - 3 pack
$12.58
In Stock
Produce Preserver Filter
$21.50
In Stock
Affresh Dishwasher Cleaner Tablets - 6
$19.09
In Stock
Cooktop Cleaning Cream
$15.57
In Stock
Cooktop Cleaner
$17.74
In Stock
Affresh Cleaner
$19.09
In Stock

Installation Instructions Provided by Fix customers like you.

Average Repair Rating: 3.2 / 5.0, 19 reviews.
  • 1
  • 2
Sort by:
Sorry, we couldn't find any existing installation instruction that matched.
Customer:
Gene from PORUM, OK
Parts Used:
WPW10757217
Difficulty Level:
Easy
Total Repair Time:
1- 2 hours
Tools:
Nutdriver, Screw drivers, Socket set
Washer stopped pumping water through the jets.
Removed front kick plate. Unhooked the water line under washer, removed screws holding to counter top and then lowered the leveling screws. I also unhooked the drain hose from the garbage disposal and put in a pan to reduce the mess others said to watch for. Pulled out the washe, laid on side and removed the bolt hoding pump in. It is a b ear to get to, needed longer extension cause my short one hung on a reinforcement channel, so I removed the channel and then got the hex head bolt out easy. One little twist and the motor came right out. Just reinstalled in reverse order of removal and it worked great. I did have my wife feed the electric cord and drain hose out the side cutout as I slid the washer out and she also pulled them back in as I reinstalled washer. Job took a couple hours and was much easier than I expected. Saved about $700.00 over buying new washer. Thanks to this site and all the instructions here for making my life easier.
3 of 3 people found this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
Customer:
David from Cape Coral, FL
Parts Used:
WPW10757217
Difficulty Level:
Really Easy
Total Repair Time:
1- 2 hours
Tools:
Nutdriver, Pliers, Screw drivers, Socket set
Circulation pump motor rusted and seized
I followed the instructions and removed the old circulation pump assembly. I reversed the process to install the new circulation pump assembly and my dishwasher has been working perfectly ever since. It has been three weeks of flawless performance from the new pump and motor.
2 of 2 people found this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
Customer:
JIM from AMHERST, MA
Parts Used:
WPW10757217
Difficulty Level:
Really Easy
Total Repair Time:
30 - 60 mins
Tools:
Nutdriver, Pliers, Screw drivers, Wrench (Adjustable)
DW very noisy. Diagnosed as pump and motor
1. Disconnect power, water, and drain lines. 2. Pull out dishwasher and lay on its side to expose underneath 3. Remove single bolt behind the cardboard shield with a nut driver 4. Disconnect power clip 5. Remove motor/pump by turning and aligning collar and pulling out. Reinstall in reverse order.
2 of 2 people found this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
Customer:
Sidney from Baton Rouge, LA
Parts Used:
WPW10757217
Difficulty Level:
Easy
Total Repair Time:
1- 2 hours
Tools:
Screw drivers, Socket set, Wrench set
Loud noise with all cycles.
Turned off water, unplugged power, removed the two screws from the counter top, the two screws at the bottom of the dishwasher, pulled the dishwasher out as far as I could to remove the water intake. Then pulled the dishwasher out carefully checking drain pipe (flex hose) and power cord until dishwasher was clear and completely free of t he counter area and turned it on its side. Removed the power strap (connector), removed the motor cover, removed the old motor, cleaned the screen and replaced, installed the new motor, put the motor cover back on, plugged the power strap (connector) back in. Set the dishwasher back up, slid it back far enough to hook the water back up, plugged the power back up and ran a test. After the test slid the dishwasher back in all the way, put the screws on, loaded the dishwasher and ran a full cycle. Your video really cleared up any concerns I had to do this on my own and all the tips helped as well. Next time less than an hour. Thank you and I’ll return as a loyal customer but hopefully not a lot, sorry.
2 of 2 people found this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
Customer:
Mark from Franklin, NJ
Parts Used:
WPW10757217
Difficulty Level:
A Bit Difficult
Total Repair Time:
More than 2 hours
Tools:
Nutdriver, Pliers, Screw drivers, Socket set, Wrench (Adjustable), Wrench set
The dishwasher ran extremely loudly
Looked over the on line video at your website. Disconnected the dishwasher. Pain in the neck because the supply line was the original copper from the sink and the electrical cord was very short and plugged in behind the dishwasher. Disconnected the drain at the sink. Laid the dishwasher down and on its side. Followed the video verbat im. Spot on with one exception: the bolt retaining the motor was very hard to get to with the nut driver due to a metal rail that was in the way. Rail was easily removed with 4 screws. Access to the bolt was then easy. Also made any future repairs easier by hard wiring on a longer extension cord and installing a 48" flexible supply line to replace the old, rigid copper supply. Dishwasher now purrs like a kitten! Like brand new. Very positive experience with your website, the shipping and receipt of product,, and the instructional provided.
2 of 2 people found this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
Customer:
Ed from Pooler, GA
Parts Used:
WPW10757217
Difficulty Level:
Easy
Total Repair Time:
1- 2 hours
Tools:
Nutdriver, Wrench (Adjustable)
MOTOR WAS VERY NOISY
I followed the very helpful video.
1 person found this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
Customer:
lisa from Brooklyn, NY
Parts Used:
WPW10757217
Difficulty Level:
Really Easy
Total Repair Time:
1- 2 hours
Tools:
Screw drivers, Socket set, Wrench (Adjustable)
Seized motor
Seized motor disconnected the dishwasher from water source and electricity, pulled machine out and laid it on its side. Removeed old pump with new pump
1 person found this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
Customer:
Conrad W from Portland, OR
Parts Used:
WPW10757217
Difficulty Level:
Very Easy
Total Repair Time:
30 - 60 mins
Tools:
Screw drivers, Wrench (Adjustable), Wrench set
pump quit windings were burnt
replaced pump motor, main wash. Changing the motor was easy one screw to remove and twist it out twist the new one in replace screw and your done. pulling the machine is what takes a little time. But all went well and the wife is very happy.
1 person found this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
Customer:
Philip from San Antonio, TX
Parts Used:
WPW10757217
Difficulty Level:
Very Easy
Total Repair Time:
1- 2 hours
Tools:
Nutdriver, Pliers, Screw drivers, Socket set, Wrench (Adjustable)
Circulation Pump Motor Needed Replacement
Smooth as silk! Simply followed step-by-step instructions in your nicely done video... Removal and replacement went quickly and easily. Ran into no problems. This site sent me a brand new motor within a week... Many thanks for the great service! - Phil G
1 person found this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
Customer:
Frank from WILLIAMSTOWN, NJ
Parts Used:
WPW10757217
Difficulty Level:
Really Easy
Total Repair Time:
30 - 60 mins
Tools:
Nutdriver, Pliers, Wrench set
7 blinks of cancel light
Everything I read said it would be the heating coil. After ohming the coil a it being good, I took a chance and checked the pump motor. It was locked up. It was an easy fix. After I disconnected the dishwasher and pulled it from under the counter, just flipped it on the side pulled the electrical plug and one screw. One quarter turn and i t was out, it was that easy to put back together.
1 person found this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
  • 1
  • 2
Customer Reviews
Average Rating: (1 Review)
1.0
★★★★★
★★★★★
Filter By Rating:
  • 5
    0
  • 4
    0
  • 3
    0
  • 2
    0
  • 1
    1
  • 1
Sort by:
Sorry, we couldn't find any existing reviews that matched. Try using some different or simpler keywords.

Model Compatibility

This part works with the following models:
Fix Number: FIX11757388
Manufacturer Part Number: WPW10757217
Brand
Model Number
Description
Kenmore
665110739120
Dishwasher
Kenmore
665110739130
Dishwasher
Kenmore
665110739140
Dishwasher
Kenmore
665110739190
Dishwasher
Kenmore
66513102K900
Dishwasher
Kenmore
66513102K901
Dishwasher
Kenmore
66513102K902
Dishwasher
Kenmore
66513103K900
Dishwasher
Kenmore
66513103K901
Dishwasher
Kenmore
66513103K902
Dishwasher
Kenmore
66513104K900
Dishwasher
Kenmore
66513104K901
Dishwasher
Kenmore
66513104K902
Dishwasher
Kenmore
66513109K900
Dishwasher
Kenmore
66513109K901
Dishwasher
Kenmore
66513109K902
Dishwasher
Kenmore
66513112K700
Dishwasher
Kenmore
66513112K701
Dishwasher
Kenmore
66513112K702
Dishwasher
Kenmore
66513113K700
Dishwasher
Kenmore
66513113K701
Dishwasher
Kenmore
66513113K702
Dishwasher
Kenmore
66513114K700
Dishwasher
Kenmore
66513114K701
Dishwasher
Kenmore
66513114K702
Dishwasher
Kenmore
66513119K700
Dishwasher
Kenmore
66513119K701
Dishwasher
Kenmore
66513119K702
Dishwasher
Kenmore
66513212K901
Dishwasher
Kenmore
66513212K902
Dishwasher