Part Location Diagram of E100959 Craftsman Gasket Kit
See part A-B in the diagram
( Grid squares measure 1x1 inch )

Gasket Kit E100959

Rated by 2 customers 

?

Really Easy 

30 - 60 mins 

Ratings submitted by customers like you who bought this part.

?
$19.03
In Stock
Fix Number:
FIX10044723
Manufacturer #:
E100959
Manufactured by:
Craftsman

Product Description

This is an OEM gasket kit for air compressors. The gaskets contained in this kit are designed to seal the pump assembly. These gaskets form a tight fit between components, allowing it to increase pressure. This kit includes five parts in total. The kit includes an oil crankcase seal rubber gasket, square cylinder to crankcase gasket, and three round gaskets (cylinder to valve plate gasket, the centre gasket, and the valve plate to head gasket). It is normal for these parts to wear over time and need replacement. For this repair you will need a wrench set to disassemble the pump.

Questions and Answers

We're sorry, but our Q&A experts are temporarily unavailable.
Please check back later if you still haven't found the answer you need.

View More View Less
Valve Reed
$13.15
In Stock
Affresh Washing Machine Cleaner - 3 pack
$12.58
In Stock
Produce Preserver Filter
$21.50
In Stock
Affresh Dishwasher Cleaner Tablets - 6
$19.09
In Stock
Cooktop Cleaning Cream
$15.57
In Stock
Cooktop Cleaner
$17.74
In Stock
Affresh Cleaner
$19.09
In Stock

Installation Instructions Provided by Fix customers like you.

Average Repair Rating: 4.0 / 5.0, 2 reviews.
  • 1
Sort by:
Sorry, we couldn't find any existing installation instruction that matched.
Customer:
Gregory from ORANGE, TX
Parts Used:
E100959
Difficulty Level:
Very Easy
Total Repair Time:
15 - 30 mins
Tools:
Nutdriver, Screw drivers, Wrench set
Leaking air @ head
Change & need check value !
Running great 95.%
3 of 4 people found this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
Customer:
RICHARD from MILLSTONE TWP, NJ
Parts Used:
E100959, E100229
Difficulty Level:
Easy
Total Repair Time:
30 - 60 mins
Tools:
Nutdriver, Socket set, Wrench set
Compressor leaking air and hot building pressure beyond 40 PSI
Unplug the power to the compressor and drain air from tank.

1. Remove two bolts under compressor motor that hold motor to frame. This allows access to the three interior screws that are part of the motor cover.
2. Remove the 6 screws that hold the motor cover. There are 3 on the back and 3 on the front.
3. Loosen t he 4 Allen head bolts from the top of the compressor. When removing, make sure that the washers are not lost.
4. Make note of the sequence of gaskets.
5. Clean off old gasket material from head. This is PIA. Use a razor. Make sure you get all of the old gasket material off, else the repair will fail.
6. Inspect reed valves, replace is necessary.
7. Position NEW gasket material and reassemble.
8. Hand tighten Allen Head bolts.
9. Tighten head bolts with torque wrench diagonally to 12 Ft Lbs.
10. Replace compressor cover. It will NOT be necessary to replace all 6 screws, if you anticipate having to do this fix again.
11. Replace the two frame bolts.
12. Done
2 of 5 people found this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
  • 1

Model Compatibility

This part works with the following models:
Fix Number: FIX10044723
Manufacturer Part Number: E100959
Brand
Model Number
Description
Craftsman
921153100
Compressor - Air Compressor
Craftsman
921153101
Compressor - Air Compressor
Craftsman
921153120
Compressor - Air Compressor
Craftsman
921153620
Compressor - Air Compressor
Craftsman
921153640
Compressor - Air Compressor
Craftsman
921164780
Compressor - Air Compressor
Craftsman
921166360
Compressor - Air Compressor
Craftsman
921166370
Compressor - Air Compressor
Craftsman
921166380
Compressor - Air Compressor
Craftsman
921166390
Compressor - Air Compressor
Craftsman
921166400
Compressor - Air Compressor
Craftsman
921169230
Compressor - Air Compressor