Kelvinator Dishwasher Seals and Gaskets

Kelvinator Appliance Parts

Popular Kelvinator Dishwasher Seals and Gaskets

★★★★★
★★★★★
3 Reviews
Fix Number
FIX9495545
Manufacturer Part Number
809006501
This dishwasher door gasket is attached to the bottom of the door, creating a strong seal between the tub and the outer edge of the door. This seal is prone to wear and tear due to its constant exposure to water, detergent, and food particles. If the gasket appears cracked, broken, or you notice a leak coming from the door, it will need to be replaced immediately. This gasket measures approximately 23 inches long. For this simple repair, no tools are necessary. Open the dishwasher door and remove the bottom rack. The gasket is located right along the bottom of the door, molded inside the channel. It is held in place in the groove across the bottom. Remove the old gasket by pulling it out with your hands. Take your new silicone gasket and line it up so the notch fits into the groove and slide it in place until it is secure. Reinstall the lower dishrack. We recommend leaving the door closed for a few hours to ensure the gasket is sealed tightly.
Fixes these symptoms
  • Door latch failure
  • Door won’t close
  • Leaking
  • See more...
Fix Number
FIX8260227
Manufacturer Part Number
154827601
The door gasket provides a watertight seal between the tub and the door, to keep water from leaking out of your dishwasher. If your dishwasher is leaking you may need to replace the door gasket. This gray door gasket is made of rubber and measures approximately 73 inches. For this repair, open the dishwasher door and remove the lower dish tray. Use your hands to pull out the old gasket. Clean the channel with a rag. Press the new gasket in place so it sits inside the groove in the door. Keep the door closed tightly for a few hours to ensure a strong seal is made.
Fixes these symptoms
  • Door latch failure
  • Door won’t close
  • Leaking
  • See more...
Splash Shield Kit
$13.67
In Stock
Fix Number
FIX2203346
Manufacturer Part Number
154701001
If your dishwasher is leaking from the corners of the gasket, you may need to replace the splash shields. The splash shields attach to the lower front corners of dishwasher and are used to prevent water from escaping past the door seal. This authentic OEM replacement kit includes two shields, one for each lower corner. When installing this part, ensure that the soft rubber edge is facing in towards the tub.
Fixes these symptoms
Fix Number
FIX421211
Manufacturer Part Number
154406401
Sold individually.
Fixes these symptoms
O-Ring - Rear
$44.87
In Stock
Fix Number
FIX420466
Manufacturer Part Number
154246901
Fixes these symptoms
O-Ring - Front
$44.87
In Stock
Fix Number
FIX420467
Manufacturer Part Number
154247001
Fixes these symptoms
Sump Gasket
$60.42
In Stock
Fix Number
FIX420465
Manufacturer Part Number
154246801
Fixes these symptoms
GASKET
$33.30
In Stock
Fix Number
FIX1148936
Manufacturer Part Number
154553501
Tower Star Gasket
$19.48
Special Order
Fix Number
FIX447095
Manufacturer Part Number
3205549
GASKET
$4.23
Special Order
Fix Number
FIX448166
Manufacturer Part Number
3351023

Related Kelvinator Dishwasher Parts