How to Fix a Tub Balance Ring for a Washer That is Shaking and Moving
Excessive shaking and moving in your washer can stem from an issue with its tub balance ring, which is used to counteract the weight of the laundry load during the wash cycle. This ring is one of the balancing components used within your washer to counteract the weight of the laundry load during the wash cycle.
But before you start worrying, this repair job will be easier than you think! With our straightforward guide down below, you can not only diagnose but replace your tub balance ring and repair your washer! This repair may require some tools, some patience, and some time, but your washer will thank you for it!
What is a Tub Balance Ring?
A tub balance ring is a ring within your washer’s tub assembly that keeps your tub and basket stable during the washing cycle. This ring is usually the same size as your tub, and is filled with fluid to offset the dispersion of weight in your tub so that it doesn’t go too far to one side of the cabinet.
Where is the Tub Balance Ring Located?
The tub balance ring will be located around the top of the tub. NOTE: With some models, the tub balance ring is only sold together with the tub as a single unit. On other models, the balance ring just clips onto the tub and can be purchased separately.
How to Access, Remove, and Inspect the Tub Balance Ring
- Start by disconnecting the power and water supply to your washer.
- Next remove the screws and remove the main control from the washer by tilting it backwards.
- Disengage the tabs and remove the cabinet from the washer to expose the tub.
- Use a rubber mallet to lightly tap on the clips that secure the balance ring. This should cause the clips to release, allowing you to remove the damaged balance ring.
- When installing the new balance ring, be sure to press down firmly so that the clips can engage with the washer tub
How to Install a New Tub Balance Ring
If you need to replace your Washer's Counter Balance Weight, this video will help you install a new one! It's an easy repair, and this tutorial will help you get it done quickly and easily.
Next: Troubleshooting the Snubber Ring
Go To Main Page: Shaking and Moving
YES
NO