Caloric Cooktop Parts

Caloric Appliance Parts

Popular Caloric Cooktop Parts

★★★★★
★★★★★
1 Review
Fix Number
FIX11750107
Manufacturer Part Number
WPW10196405
This chrome drip bowl is an OEM approved replacement part sourced directly from the manufacturer. Drip bowls are a part for your cooktop, positioned underneath the burner to catch spills. This drip bowl fits under 8-inch burner elements and has a diameter of approximately 10-inches. It is common for the manufacturer to switch up designs, so it may not match your current part, however searching using the correct model number will ensure proper fit and function. Drips bowls are prone to wear and tear and can be a fire hazard if not replaced when needed. It is also a quick, easy, and cheap way to give your appliance a fresh new look. Each drip bowl is sold individually, so if you are interested in replacing your other drips bowls, they need to be ordered separately. This is also an opportune time to inspect the terminals for corrosion or damage, and the condition of the burner. No tools are required for installation, simply line up the hole on the bowl with the terminal block and drop it into place. Give your new drip bowl a regular cleaning with warm water and soap to help it last as long as possible.
Fixes these symptoms

Installation Instructions

Henry from St Louis, MO
Replace old drip Bowls
Remove heating elements, remove old drip bowl, install new drip bowls replace heating elements. Read more...
Drip Bowl - 6 Inch
$10.10
In Stock
★★★★★
★★★★★
2 Reviews
Fix Number
FIX2366565
Manufacturer Part Number
W10196406RW
The drip bowl is used for electric ranges or cooktops with the coiled style burners, to catch any drips, spills, or crumbs that may occur while cooking. If your bowls have become discolored, corroded, difficult to clean, or otherwise damaged it may be time to replace them. This repair is easy and does not require any tools to complete the job. Ensure that all burners are turned off and cool to the touch before starting. First you need to lift up and disconnect the burner from the socket. While you have the burner out, it is a good time to check it for any signs of damage. Look at the terminals for any signs of arcing or burning. If you notice this, you will want to replace both the element and the receptacle it plugs into. Remove the old drip bowl by pulling it out. Then insert the new one by lining up the small hole on the side with the element block. Ensure that it is siting flat and then plug the element back into the socket. Please note that the manufacturer has substituted this part, and it no longer has a solid bottom. It is not recommended to cover the hole with products like aluminum foil, as it can trap heat or melt, becoming a fire hazard. As it is an OEM part, it ensures it will fit your model. The drip bowls are sold individually, chrome in color and about 8 inches in diameter, made to fit under a 6 inch burner element.
Fixes these symptoms

Installation Instructions

chris from ABERDEEN, SD
Burner would not heat up and the cook top on light would not turn off.
First turn off breaker. Pull out stove and unplug. There was about 8 screws on the panel on the back side of the control panel. Remove panel. Remove knob on the bad control and there is 2 screws behind knob. Remove those 2 screws and take the new control and remove 1 wire at a time from old switch to new one then put back together. Read more...
Surface Burner Plug-In Block Kit
$13.42
In Stock
★★★★★
★★★★★
4 Reviews
Fix Number
FIX340571
Manufacturer Part Number
330031
This is a genuine OEM replacement part. This surface burner plug-in block kit is designed for use with surface elements of your ranges and cooktops. This kit helps connect the wire harness to the surface element. If your element is not heating, or if it only heats intermittently you may have an issue with your terminal block. This is a newer-style terminal block kit, it includes the plastic receptacle block, two metal brackets, two pre-crimped hi-temp wire leads with terminals, two ceramic nuts, two screws, and heat shrinking insulators. Before beginning this repair make sure you have unplugged your appliance.
Fixes these symptoms

Installation Instructions

Doris from Skoke, IL
Elements heat sporatically
I followed the steps in the instructions which were very easy, once the electric power was turned off to the range. I replaced 2 burner plug in blocks in less than 30 minutes. I am embarrassed to say that these burners have not been functional for almost 3 years. I thought that I could not work with electric. Just make sure you have the tools on hand and read the instructions first. I am a mid-50's female, if I can do this so can anyone else! Read more...
Fix Number
FIX11751368
Manufacturer Part Number
WPW10259868
This is a genuine OEM replacement part. This surface element is commonly used on ranges and cooktops. This is a six inch and four turn electric surface heating element. This element is what heats the cookware you are using on your range and cooktop. If your element is no longer heating it may need to be replaced. This surface element is sold individually. Before replacing this part make sure you unplug your appliance.
Fixes these symptoms
Surface Burner Element - 8 Inch
$110.85
In Stock
Fix Number
FIX11740903
Manufacturer Part Number
WP3191454
This large surface burner is 2100W.
Fixes these symptoms

Installation Instructions

robert from franklin, VT
burner was broken and seperated from bracket.
installed new drip bowls and new burner in about three minutes! Works great! Thanks! Read more...
Surface Element - 6 Inch 1200W
$74.88
In Stock
Fix Number
FIX11740904
Manufacturer Part Number
WP3191455
Sold individually.
Fixes these symptoms
Surface Igniter
$69.15
In Stock
Fix Number
FIX353641
Manufacturer Part Number
4157608
Infinite Switch
$80.30
On Order
Fix Number
FIX12347313
Manufacturer Part Number
W11121639
Fixes these symptoms

Appliance Type

Popular Caloric Cooktop Models