GED15P1 Gibson Dehumidifier - Instructions
Jump to:
Keep searches simple. Use keywords, e.g. "leaking", "pump", "broken" or "fit".
- Customer:
- Jonathan from New Oxford, PA
- Parts Used:
- 5303296823
- Difficulty Level:
- Really Easy
- Total Repair Time:
- Less than 15 mins
- Tools:
- Screw drivers
Unit would run continuously and not shut off
Removed the front cover and then the humidistat from the bracket. Two push on wire connectors and then reversed. Very straightforward and excellent part matching. Given the prices for new dehumidifiers it was great to breathe life back into this unit which does its job well. Thanks for the easy to use web site and fast fast service!
Was this instruction helpful to you?
Thank you for voting!
- Customer:
- Gregory from MARINETTE, WI
- Parts Used:
- 5303306080
- Difficulty Level:
- Very Easy
- Total Repair Time:
- Less than 15 mins
The float turned up missing during a move to another city.
The repair was just putting the float into the inside of the tank itself and then, inserting the two pins (left and right) into each slot so the float operates up and down freely.
Was this instruction helpful to you?
Thank you for voting!
- Customer:
- Bob from Omaha, NE
- Parts Used:
- 5303306080
- Difficulty Level:
- Really Easy
- Total Repair Time:
- Less than 15 mins
We lost the water float. Needed a replacement
The float has two prongs that fit two snap fasteners on the reservoir tank. I just pressed the float prongs into the snap fasterners and inserted the reservoir tank into the dehumidifier. Turned the switch and pressto! We are in business.
Was this instruction helpful to you?
Thank you for voting!
- Customer:
- Gwendolyn from COLUMBUS, OH
- Parts Used:
- 5303306080
- Difficulty Level:
- Very Easy
- Total Repair Time:
- Less than 15 mins
Replaced the float in my dehumidifier
Snapped the float into the slot. That was all there was to do.
Was this instruction helpful to you?
Thank you for voting!
- Customer:
- Kerwin from BUFFALO, NY
- Parts Used:
- 5303296823
- Difficulty Level:
- Very Easy
- Total Repair Time:
- Less than 15 mins
- Tools:
- Screw drivers
Dehumidifier would not shut off automatically
Remove the front cover 2 screws on the bottom. Then removed the clip for the full light, then removed 2 more screws that held the humidistat. Removed the 2 power wires removed part. Reverse the uninstall procedure. Done
Was this instruction helpful to you?
Thank you for voting!
- Customer:
- John from Presque Isle, MI
- Parts Used:
- 5303296823
- Difficulty Level:
- Really Easy
- Total Repair Time:
- 15 - 30 mins
- Tools:
- Screw drivers
Humidifier would not shut off
Removed cabinet and grill. Humidistat held in by 2 screws and a 3-wire harness. Dehumidifier working like a charm with the new part.
Was this instruction helpful to you?
Thank you for voting!
- Customer:
- William from Allentown, PA
- Parts Used:
- 5303296823
- Difficulty Level:
- Really Easy
- Total Repair Time:
- 1- 2 hours
- Tools:
- Nutdriver, Pliers
Dehumidifier would not shut off
First I pulled the top/side cover off. Disconnected the terminals from the old unit, unscrewed the old unit, and put the terminals on the new unit. Then I put the side/top cover back on, screwed the new humidistat unit into the front cover and then popped and screwed the front cover back in place. Customer service was excellent and order was received promptly as promised. Highly recommend Parts Select!
Was this instruction helpful to you?
Thank you for voting!
- Customer:
- Michael from Bethesda, MD
- Parts Used:
- 5303296823
- Difficulty Level:
- Really Easy
- Total Repair Time:
- 15 - 30 mins
- Tools:
- Screw drivers
Dehumidfier wouldn't turn off.
First I removed the two control knobs and the two screws that hold the front cover in place and then the two screws that hold the element in place. I then pulled the element out about 3 inches and disconnected the two wires. Then I reconnected the new humidistat and put everything back together. Works just fine, now.
Was this instruction helpful to you?
Thank you for voting!