Models > MS2550

MS2550 (41BDZ20C768) MTD Trimmer

Jump to:

Find Part by Name

Keep searches simple, eg. "belt" or "pump".

Diagrams for MS2550

Viewing 2 of 2
Engine Assembly Diagram and Parts List for 41BDZ20C768 MTD Trimmer
Engine Assembly
General Assembly Diagram and Parts List for 41BDZ20C768 MTD Trimmer
General Assembly
Keep searches simple, eg. "belt" or "pump".
Throttle Trigger – Part Number: 753-04119
This is a genuine OEM replacement throttle trigger (red). The throttle trigger is responsible for managing the speed of the engine. The throttle cable attaches to the trigger, which connects to the th...
No Longer Available
Fuel Tank Assembly – Part Number: 753-06183
$13.07
This is an authentically sourced fuel tank assembly, including the fuel lines, fuel cap, fuel filter, and screws needed for assembly. This fuel tank assembly is for trimmers, and is where the fuel is ...
In Stock
Clutch Assembly, Small – Part Number: 753-05860
$24.60
In Stock
Carburetor – Part Number: 753-06288
No Longer Available
Aircleaner Filter – Part Number: 753-06417
$3.99
In Stock
Carburetor O-Ring – Part Number: 753-06185
$3.99
In Stock
Air Cleaner Gasket – Part Number: 753-06253
$3.99
In Stock
Switch – Part Number: 791-182405
$10.15
This switch is used on a variety of trimmers, blowers and other similar gardening equipment. This switch controls the on and off operations of your tool. Switches have mechanical internals, which degr...
In Stock
Upper Drive Shaft and Housing Assembly (Shaft is 25-1/8") – Part Number: 753-04344
$86.98
In Stock
Split-Boom Coupler – Part Number: 753-1190
$22.48
In Stock
Throttle Trigger Spring – Part Number: 791-182690
$7.66
In Stock
Fuel Cap Assembly – Part Number: 791-182612
$19.28
In Stock
View More

Questions and Answers

Be the first to ask our experts a question about this part!

Common Problems and Symptoms for MS2550

Viewing 1 of 1
Will Not Start
Fixed by these parts
Fixing
How to fix it
Replacing the Upper Drive Shaft and Housing Assembly (Shaft is 25-1/8")

Replacing the Upper Drive Shaft and Housing Assembly (Shaft is 25-1/8")

View More
Keep searches simple. Use keywords, e.g. "leaking", "pump", "broken" or "fit".
Customer:
Erik from ROBERTSDALE, AL
Parts Used:
753-06183
Difficulty Level:
Really Easy
Total Repair Time:
15 - 30 mins
Tools:
Screw drivers
Fuel line broke
Removed the two screws holding the fuel tank to the main unit. Removed the two fuel lines and any stuck on rubber. Installed and installed two screws to mount the new tank. Slid fuel lines on their respective connectors. Done.
12 of 14 people found this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
Customer:
Michael from GLENN HEIGHTS, TX
Parts Used:
753-06183
Difficulty Level:
Really Easy
Total Repair Time:
Less than 15 mins
Tools:
Screw drivers
Super Easy Install
The fuel tank is held in place by 2 screws. Simply take the screws off and pull off the fuel lines.
Take the new fuel tank. Put it in place and screw the 2 screws in to hold the fuel tank.
Connect the fuel lines and you're done.
This is the easiest repair I have ever done on any of my lawn equipment.
3 of 3 people found this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
View More