Models > 10654

10654 (240000001-240999999 - 2004) Lawn Boy Lawn Mower

Jump to:

Find Part by Name

Keep searches simple, eg. "belt" or "pump".
Keep searches simple, eg. "belt" or "pump".
Spark Plug - Bpr6Es - Ngk – Part Number: 98079-56846
$3.99
This is a genuine OEM Honda replacement part. Spark plugs are used to take energy from the battery to create and electric spark, that spark is used to ignite the air fuel mixture in your small engine....
In Stock
Blade-22 Inch – Part Number: 131-4547-03
$24.90
This is a genuine OEM replacement blade for use on Lawn Mowers. If the blade is too dull it will tear the grass instead of an even cut. A bent or damaged blade can cause serious damage or injuries. Yo...
In Stock
Bolt-Shoulder – Part Number: 614650
$4.99
In Stock
Knob-Handle – Part Number: 106-4161
$4.99
In Stock
Screw-Handle – Part Number: 92-2260
$4.99
In Stock
Nut-Lock, Ni – Part Number: 3296-29
$3.99
This is a nut, for a variety of outdoor lawn equipment. This part is a nylon insert locking nut, meaning it has a nylon collar insert that makes the nut resistant to turning from heavy vibrations. It ...
In Stock
Guide-Cable – Part Number: 114-7988
$3.99
In Stock
Bolt-Blade – Part Number: 125-2466
$3.99
In Stock
Screw-Taptite – Part Number: 95-1726
$3.99
In Stock
Screw-Hwh – Part Number: 46-8091
$4.99
In Stock
Spring-Torsion – Part Number: 99-5293
$10.44
In Stock
Washer – Part Number: 40-1940
$3.99
In Stock
View More

Questions and Answers

Be the first to ask our experts a question about this part!

Replacing the Spark Plug - Bpr6Es - Ngk

Replacing the Spark Plug - Bpr6Es - Ngk

View More
Keep searches simple. Use keywords, e.g. "leaking", "pump", "broken" or "fit".
Customer:
randy from HIGHLAND, IL
Parts Used:
106-3999, 106-3987
Difficulty Level:
Very Easy
Total Repair Time:
15 - 30 mins
Tools:
Wrench set
The hub that the mower blade mounts to was broken
The hub that the mower blade mounts to was brokenPut the new Harbonne played and played securing flange bolted it up
6 of 16 people found this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
Customer:
Ray from YARDLEY, PA
Parts Used:
105-1809
Difficulty Level:
Really Easy
Total Repair Time:
Less than 15 mins
Tools:
Socket set, Wrench set
Wheel height adjuster lever (spring steel) cracked / split in two.
Tip mower onto side, raising side to be repaired. Empty gas tank if possible or use rags to prevent gasoline drips onto clean surfaces.

Remove wheel using a 1/2" socket.
Remove wheel height assembly with 1/2" socket and open end wrench to hold nut below the deck.
Position new spring arm over the slot on wheel height assembly plate. Check opposite side to verify correct orientation if needed.
Remove plastic cover from old lever using a small flat blade screwdriver. Slip onto new lever.
Replace wheel height assembly.
Replace wheel.
Read less
3 of 10 people found this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
View More