Models > 323L > Instructions

323L Husqvarna Hedge Trimmer - Instructions

Jump to:

All Instructions for the 323L
1 - 3 of 3
Keep searches simple. Use keywords, e.g. "leaking", "pump", "broken" or "fit".
Customer:
JAMES from FAYETTEVILLE, AR
Parts Used:
503283401
Difficulty Level:
Very Easy
Total Repair Time:
Less than 15 mins
Would not start now runs great
Remove and replace
5 of 5 people found this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
Customer:
Jeremy from DILLSBURG, PA
Parts Used:
537034101
Difficulty Level:
Easy
Total Repair Time:
15 - 30 mins
Fixed up somebody's old trimmer they threw at the curb
This trimmer was in relatively good shape. Somebody had thrown it out! They thought they had broke the rewind, but when I ended up taking it off, it sucked right back in. They also must have broke the vibration plate on the bottom. With the screws and plate I bought from here, plus a new head and service kit I got elsewhere , this thing ran like a champion again.
4 of 8 people found this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
Customer:
Richard from CHINA GROVE, NC
Parts Used:
503283401, 503497101
Difficulty Level:
Very Easy
Total Repair Time:
15 - 30 mins
Tools:
Nutdriver
Weed eater flooded constantly.
Very simple repair...took the old carburetor off and installed the new one. After replacement, the weed eater fired up after the second pull. Cover, removed 4 bolts. Carburetor, three bolts. Removed two hoses, choke handle and installed. Order gasket...never hurts to replace gaskets. One other thing, most important...use premix fuel!!! I use it in all gas powered equipment now. Cleaner and does not gum up filters and carburetor.
3 of 5 people found this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
All Instructions for the 323L
1 - 3 of 3