Models
>
17N163
17N163 Graco Paint Sprayer
Jump to:
Find Part by Name
Keep searches simple, eg. "belt" or "pump".
Diagrams for 17N163
Viewing 1 of 1Keep searches simple, eg. "belt" or "pump".
In Stock
Special Order
In Stock
In Stock
In Stock
In Stock
In Stock
In Stock
On Order
In Stock
In Stock
On Order
Questions and Answers
We're sorry, but our Q&A experts are temporarily unavailable.
Please check back later if you still haven't found the answer you need.
Keep searches simple. Use keywords, e.g. "leaking", "pump", "broken" or "fit".
- Customer:
- Tyler from GRESHAM, OR
- Parts Used:
- 16Y425
- Difficulty Level:
- Very Easy
- Total Repair Time:
- Less than 15 mins
The O-ring that was on my Graco Paint Sprayer was worn out and needed to be replaced
The O-ring that connects the paint container to the paint sprayer was worn out from previously using it over the past couple of years. I started to notice that air would leak in the container causing the pain sprayer to not spray paint as normal. I would have to squeeze the air out of the container and hold it so the paint would go into t
... Read more
he pump to spray.
I purchased the new o-ring and took off the old o-ring with a small flat head screw driver. I put the new o-ring on and filled up the container with paint and the suction held after letting the air out. This fixed my issue of the air coming back into the container.
I purchased the new o-ring and took off the old o-ring with a small flat head screw driver. I put the new o-ring on and filled up the container with paint and the suction held after letting the air out. This fixed my issue of the air coming back into the container.
Read less
Was this instruction helpful to you?
Thank you for voting!