How to Troubleshoot and Repair a Dryer That Has a Sagging Door
A sagging dryer door is caused either by its hinges being worn out or because the door itself is too heavy for the hinges to support. In these cases, it may be hard to close the door properly and the dryer might not operate. We have repair guides, 3D renderings, and expert-made videos that will help you decide if your dryer’s door is sagging because of a common use case scenario, or because a part is damaged. Should you need to replace a dryer part, we have step-by-step instructions to help you access, remove, and install it.
How to Troubleshoot a Dryer That Has a Sagging Door
When you open or close your dryer door, you may find that it feels loose. This is an indication that the dryer's hinges have worn out over time.
Using This Page, You Will be Able to Troubleshoot the Following Symptoms
- Dryer Door is Drooping or Sagging
- Dryer Door is Not Closing or Shutting
- Dryer Door Does Not Stay Closed or Shut
Inspect This Common Issue First
If your dryer door is sagging, you should first take a look at this common problem.
Is the Door Screwed On Tight?
Your dryer door may droop because the screws holding the hinges in place have become loose. Open the door as wide as it can go and use a screwdriver to tighten the screws.
FIX TIP
Common Parts You May Need to Replace
If the door is still sagging, then you should take a closer look at the parts found near the dryer’s door—either the door hinge or its catch-and-strike mechanism may be faulty.
- Door Hinges The hinges on the dryer door support the door’s weight and are subjected to wear- and- tear over time. After prolonged use, the hinges can become misaligned. This is especially the case when the dryer door is too heavy for the hinges. That’s when your dryer door starts sagging.
- Door Catch and Strike The door catch and the door strike work together to keep the dryer door shut. When one or both are out of place or are bent, they are unable to connect in a straight horizontal line. When this happens, your dryer door appears to sag.
YES
NO