Electrolux Refrigerator Parts

Electrolux Appliance Parts

Popular Electrolux Refrigerator Parts

Fix Number
FIX2358880
Manufacturer Part Number
241993101
If opening and closing your refrigerator is difficult, it could be due to a damaged or warped crisper cover front support. This part keeps the crisper shelf in place and mounts to the inside cabinet wall. Sold individually, this part is white in color, measures approximately 1 inch in diameter, and can be used for the front and rear support. The installation of this part is considered easy and should only take a few minutes. You will need a small flat blade screwdriver, putty knife, and soft hammer. Take the crisper and shelf out of the refrigerator first. To remove the old part, start by pushing the locking pin into the interior of the cabinet using the screwdriver, pull the support out with the putty knife. If taking out the pin is difficult, use a flat blade screwdriver to push it down and out of sight, this will not harm your refrigerator. Remove the pin and attach the new support, using a soft hammer to lock the new pin in place.
Fixes these symptoms

Installation Instructions

Abraham from FLUSHING, NY
The original freezer handle 530-450-6469 had a sharp corner that could hurt one’s head upon coming up when reaching for a lower shelf in the refrigerator. I replaced it with door handle 218428101 which has a tapered end.
To take out the old handle, you simply take out the screws from the bottom and then you rotate the handle counterclockwise, and it released the top part of the handle from that screw hook. To put on the new handle I just did the reverse but since my new handle was not the official handle for the fridge, it did not fit the old screw holes but it did coincide with other screw holes that were plugged. I did not yet drill the screws into the new plugged area but just put on duct tape and it seems to be holding just fine. If I cared about the aesthetics, I would just drill the holes into the plugged screw holes. Read more...
Door Handle
$47.55
In Stock
Fix Number
FIX427922
Manufacturer Part Number
218428101
This handle works on both the fridge and freezer door, and if yours has become damaged it should be replaced. This is a genuine OEM replacement part, and is sold individually. If you need to replace both handles, please be sure to order the correct quantity. This is an easy repair that requires the use of a Phillips screwdriver. If the old handle is still attached to the door, remove the two screws (located at the top of the fridge door, or bottom of the freezer door) and then slide the opposite end off of the single screw. When attaching the new handle, do this in the opposite order. Slide the keyhole in the handle onto the individual screw on the door, then line up the other end of the handle and insert the two screws to secure the handle to the door.
Fixes these symptoms

Installation Instructions

Michelle from Cypress, TX
Crisper cover support broke
I watched the video you had on your website---really easy-you guys ROCK! Read more...
★★★★★
★★★★★
3 Reviews
Fix Number
FIX429871
Manufacturer Part Number
240338001
This easy-to-install refrigerator door shelf bin is used to hold products inside your refrigerator. It is sold individually. This shelf attaches to the door and is designed for the upper shelf. This white plastic shelf bin is approximately 26-inches wide, just over 4-inches tall and 7-inches deep. This shelf is prone to wear and tear over the lifetime of the appliance and will need to be replaced when it appears damaged, cracked, or warped. This is a quick and easy repair that only requires you disengage the old shelf with your hands and snap the new one into place.
Fixes these symptoms

Installation Instructions

Christine from Torrington, CT
Shattered glass shelf, broken shelf on door and broken track for deli drawer
Just put the parts where they belong Read more...
Air Filter
$31.75
In Stock
★★★★★
★★★★★
2 Reviews
Fix Number
FIX1993820
Manufacturer Part Number
EAFCBF
This is an authentic air filter for refrigerators, sold individually. It helps to reduce strong odors and impurities found in the air. This filter needs to be replaced every 6 months to ensure it is working at full efficiency. The air filter can be found in different areas of your refrigerator depending on the model but is commonly found on the inner right or left side. Replacing it is very quick and easy and does not require tools. It is as simple as removing the old one and sliding the new one into place.
Fixes these symptoms
  • Fridge too cold
  • Fridge too warm
  • Ice maker not making ice
  • See more...

Installation Instructions

Michael from RCH CUCAMONGA, CA
Replacing expired parts
when you are removing the expired refrigerator water filter to push the part in until it clicks. At which point you allow it to release itself. Make sure not to pull the filter out before pushing it in. Read more...
★★★★★
★★★★★
1 Review
Fix Number
FIX429854
Manufacturer Part Number
240337103
This authentic replacement crisper pan, also known as a vegetable drawer, inserts into the refrigerator crisper area. It is used to hold produce and maintain an ideal temperature to help preserve them as long as possible. The pan is clear plastic and measures roughly 11 inches deep, 22 inches long, and is sold individually.
Fixes these symptoms

Installation Instructions

Rosemarie from Pioneer, CA
renter ruined the crisper drawers and the bottom shelf.
open refrigerator removed old cracked pieces, and cleaned glass self. installed new parts in place. Took less than 5 minutes and it is much better. Read more...
★★★★★
★★★★★
4 Reviews
Fix Number
FIX429873
Manufacturer Part Number
240338101
This is a white plastic door shelf bin for your refrigerator. It is attached to the inside bottom of the refrigerator door shelf where it helps to contain items such as jars and condiments. This part can break or warp over time and will need to be replaced. It measures roughly 24-3/4 inches wide by 3.4 inches tall. This is a quick and easy installation, not requiring any tools. Simply snap it in place on the mounting tabs. This is an OEM part that is sold individually.
Fixes these symptoms

Installation Instructions

Doreen from Fairhope, AL
gasket leaking
Nice to have a groove to accept new gasket. I did better starting with the corners and working toward the centers rather than out from the centers. Read more...
★★★★★
★★★★★
2 Reviews
Fix Number
FIX7784018
Manufacturer Part Number
242252702
This is a refrigerator water inlet valve and mounting bracket. It is responsible for releasing water from the supply line when triggered, which makes its way through to the water dispenser and/or icemaker in your refrigerator. It is located behind the refrigerator, connected to the water supply. This part is prone to material fatigue from normal use. A defective water valve could cause a lack of ice production, and your water dispenser to stop working properly. If the solenoids no longer have continuity or the valve is plugged, it will need to be replaced. For this repair, you will need to pull the refrigerator out from the wall and disconnect the water and power connection. Please note that this part may look different than the original but is a manufacturer-approved replacement.
Fixes these symptoms
  • Ice maker dispenses too little ice
  • Ice maker not making ice
  • Ice maker won’t dispense ice
  • See more...

Installation Instructions

roger from hubbard, IA
Valve wouldn't fill the ice maker
Old valve used compression fittings on the plastic lines. The new valve uses the push oring fittings which required cutting off the end of each line. The line to the ice maker was quite short to start with and after cutting the end off it was to short which required splicing in a short piece of line. After installation it works fine Read more...
Upper or Lower Mullion Hinge Pin
$23.18
In Stock
Fix Number
FIX2358752
Manufacturer Part Number
241779401
Sold individually.
Fixes these symptoms
Fix Number
FIX2358879
Manufacturer Part Number
241993001
This rear crisper support mounts on the inside of the refrigerator wall to support the rear crisper cover. It is made of white plastic and is sold as an individual part. The support is secured in place by a locking pin. It usually becomes evident that this part needs to be replaced when the shelf is no longer level or the drawer is not opening and closing as it should. For this repair, you will need to remove all the shelves above the crisper to provide space to complete this easy repair. You will need a small putty knife, short flat blade screwdriver, and a small hammer.
Fixes these symptoms

Installation Instructions

Charles from Candler, NC
Crisper support broke causing the crisper to chip on back left corner and the plastic cover broke.
Took hammer and punch pushed the cover pin through, using a putty knife and tape to protect the paint pried the cover support out. pushed the new support in and tapped the pin flush with outside edge of support placed cover back on supports replacing glass. had to order pan-crisper. Every thing came in securely packed and was shipped very quickly. Thank you for the video information on how to remove the broken support. Read more...
Light Bulb
$19.73
In Stock
Fix Number
FIX12751166
Manufacturer Part Number
316538904
Clear, 120 Volt, 40 Watt.

Installation Instructions

Chris from Lillington, NC
Broken bake element & light bulb
Turned of the power at the fuse box as the oven was hard wired to the electrical source and then removed the old element via the screws at the back of the oven. Disconnected the wires from the element and then reconnected those to the new element. Screwed the element base to the back wall of the oven and then replaced the light bulb. Read more...

Appliance Type

Related Pages

Popular Electrolux Refrigerator Models