Kenmore Cooktop Elements and Burners

Fix Number

FIX470125

Manufacturer Part Number

5303935058

This kit comes with the necessary components to replace your burner terminal block. It includes interchangeable mounting brackets, a terminal box, ceramic wire nuts, heat shrink protective tubing, and wires. The purpose of this part is to connect the wire harness to the surface element, which allows for the burners to heat up. Some common issues that result from a damaged terminal block is that your element will not heat properly or not heat up at all, may cause burning smell, or make a buzzing noise. If you remove the element and the tips are black, that is a good sign there is a problem with the terminal block and it should be replaced. It may also be necessary to replace the burner elements as well, if the tips are badly damaged. This repair will require a pair of wire strippers, a #1 square head screwdriver, and a heat gun or hair dryer. If you are not comfortable with cutting, stripping, and reconnecting of wires you should contact a qualified professional to complete this repair. Please be sure to disconnect the power supply to your appliance before starting this repair. As this is a genuine OEM parts kit, it will be compatible with your appliance model.

Fix Number

FIX2339241

Manufacturer Part Number

316442300

If the burner element on your range is damaged or no longer heating up, the element should be replaced. When you remove the element, check the terminals for any signs of corrosion or arcing. If you find these, you will also need to replace the terminal block (which can be purchased separately). Replacing this part is easy and does not require any tools. Please ensure that the burner is turned off and cool to the touch before beginning the repair. Lift up and pull out the old element, then line up the new one and insert into the terminal block. This is a genuine OEM part that measures 8 inches in diameter, has four turns, 220 volts, and looped terminal ends.

Fix Number

FIX2582086

Manufacturer Part Number

318372210

This is a genuine OEM 6-inch burner element for your electric range or cooktop. If the element is no longer heating up, it may be time for a replacement. When you remove the old element, inspect the terminals for signs of arcing or corrosion. If these are present, you may also need to replace the terminal block that the element is plugged into. Before beginning this repair, be sure to disconnect the power supply to your range. No tools are required to replace the element, simply pull out the damaged part and push the new one into place. Please note that this part is sold individually.

★★★★★

★★★★★

1 Review

Fix Number

FIX1570190

Manufacturer Part Number

12001676

This genuine OEM kit includes the parts required to replace a surface burner receptable on your range. The kit comes with a plastic block, a metal bracket, high temperature wire nuts, and wires. The burner elements on the cooktop plug into the receptacle, and if the burner is not heating up properly, the receptacle may need to be replaced. Other signs that the receptacle is faulty is if there is corrosion on the element terminals. Before beginning this repair, please be sure to disconnect the power supply to your range. You will need a pair of wire strippers and a Phillips screwdriver for this installation.

Fix Number

FIX11743366

Manufacturer Part Number

WP660532

The manufacturer suggests replacing the receptacle at the same time.

Fix Number

FIX242972

Manufacturer Part Number

WB2X8228

Also known as receptacle.

Fix Number

FIX243868

Manufacturer Part Number

WB30M2

Fix Number

FIX243867

Manufacturer Part Number

WB30M1

This Y-frame six inch surface burner element has five turns and a metallic center medallion.

★★★★★

★★★★★

1 Review

Fix Number

FIX1528719

Manufacturer Part Number

318178110

Fix Number

FIX232606

Manufacturer Part Number

WB17X210

This kit comes with the terminal block, mounting clip and wires.