Models
>
SCV43
SCV43 Southland Tiller
Jump to:
Find Part by Name
Keep searches simple, eg. "belt" or "pump".
Keep searches simple, eg. "belt" or "pump".
In Stock
In Stock
On Order
In Stock
In Stock
In Stock
In Stock
In Stock
In Stock
In Stock
$265.11
This is an authentic part that is sourced directly from the original equipment manufacturer for Southland and Powermate cultivators. The transmission is a special component that connects to the engine...
In Stock
In Stock
Questions and Answers
We're sorry, but our Q&A experts are temporarily unavailable.
Please check back later if you still haven't found the answer you need.
Common Problems and Symptoms for SCV43
Viewing 1 of 1Keep searches simple. Use keywords, e.g. "leaking", "pump", "broken" or "fit".
- Customer:
- Rogers from SAN ANTONIO, TX
- Parts Used:
- A200778
- Difficulty Level:
- Very Easy
- Total Repair Time:
- 15 - 30 mins
Fuel tank cracked from winter cold, created a large hole.
It was as simple as removing four (4) hex screws holding the gas tank to the tiller frame. Once the tank was removed, took a screwdriver to pry the fuel line from the old tank (being careful not to damage the rubber seals). Place fuel line (there is another short line attached to it), I call it a breather line.Once in, attach fuel tank to
... Read more
tiller frame. Prime and start. This is super easy.
TIP: When placing the lines in the new tank, ensure you have the small and the large line in the same position as it came off the old tank, as the small must marry up with the small line and the larger one with the larger one.
TIP: When placing the lines in the new tank, ensure you have the small and the large line in the same position as it came off the old tank, as the small must marry up with the small line and the larger one with the larger one.
Read less
Was this instruction helpful to you?
Thank you for voting!
- Customer:
- Keith from MAGNOLIA, TX
- Parts Used:
- A200783
- Difficulty Level:
- Really Easy
- Total Repair Time:
- Less than 15 mins
- Tools:
- Pliers, Screw drivers, Socket set
Pull rope broke and starter cup spring lost
I follow a guy on YouTube alot of good videos on how to replace.
Was this instruction helpful to you?
Thank you for voting!