This is a genuine OEM white plastic door bin for a refrigerator. It is mounted on the inner door and is designed so it can be easily moved to adjust for additional space as needed. It holds food items...
If opening and closing your refrigerator is difficult, it could be due to a damaged or warped crisper cover front support. This part keeps the crisper shelf in place and mounts to the inside cabinet w...
To ensure fresh, unscented, unflavored drinking water and ice, you will need to relace your water filter every 6 months or when the indicator light suggests. This NSF-Certified authentic water filter ...
This rear crisper support mounts on the inside of the refrigerator wall to support the rear crisper cover. It is made of white plastic and is sold as an individual part. The support is secured in plac...
This white plastic refrigerator door bin is sourced directly from the manufacturer. It is used to hold items inside the refrigerator. It is one galloon in size and is sold individually. It is commonly...
This original equipment manufacturer Door Shelf is a white plastic part which holds items inside of your freezer or refrigerator door. It is roughly 10 inches long by 4 inches high by 5.5 inches wide....
This is a refrigerator water inlet valve and mounting bracket. It is responsible for releasing water from the supply line when triggered, which makes its way through to the water dispenser and/or icem...
The upper crisper drawer cover is the frame that supports the crisper drawer and holds the glass shelf. Excess weight and regular wear can cause damage to the frame, and if broken it should be replace...
The crisper drawer, also known as a crisper pan, is a clear plastic drawer found in your refrigerator. They typically hold fruits or vegetables, and the drawer has a slide control that will allow you ...
This is a genuine OEM ice maker assembly for your refrigerator. The ice maker makes eight cubes at a time, by filling the mold with water from the inlet valve, freezing the water until the cubes are f...
This is a genuine OEM kit for the defrost thermostat in your freezer. This kit comes with the clip, leads, and heat shrink. Some indicators that you may need to replace your thermostat is if there is ...
This genuine OEM replacement part is the plastic cover or frame for the crisper drawer in your refrigerator. The crisper drawer sits underneath, held in place with the molded glide rails, and the glas...
In Stock
Questions and Answers
Ask our experts a question about this part and we'll get back to you as soon as possible!
2 questions answered by our experts.
< Prev
1
Next >
Sort by:
Search filter:
Clear Filter
Your search term must have 3 or more characters.
Keep searches simple. Use keywords, e.g. "leaking", "pump", "broken" or "fit".
Sorry, we couldn't find any existing answers that matched. Try using some different or simpler keywords, or submit your new question by using the "Ask a Question" button above!
Kim
February 9, 2024
My freezer is 28 my fridge side is 36-39 both fans are running heating element is working what could it be. I’ve bought both sides thermostats defrost thermostat what could it be I haven’t replaced anything. There was a huge brick of ice on coils but I defrosted that but temperature are still not where they should be
For model number FFHS2611LBRA
Hi Kim,
Thank you for your question. If the fresh food and freezer sections of your refrigerator are too warm, we would recommend checking the electronic control board and the capacitor. We hope this helps!
Why does my fridge side not getting cool but the freezer is cold?
For model number FFHS2611LBRA
Hi Andrea,
Thank you for your question. If the fresh food section of your refrigerator is not cooling, we recommend checking the defrost thermostat kit, but you should also check the damper control assembly, the run capacitor and the evaporator fan motor. We hope this helps with the repair!
In my specific appliance the water valve is located in the bottom right hand corner looking at it from the back. To get to it I remove the thin layer of cardboard the covers the back of the fridge. I then proceeded to disconnect the 1/4" copper tubing which is the water feed coming out of the wall. Then I removed the screws that hold the
... Read more valve assembly in place. I took the water valve out and removed the electrical connections as well as the plastic tubing which feed the water dispenser and the ice maker. To install the new water valve it was just a matter of reversing steps.