Models
>
RY49701
RY49701 Ryobi Log Splitter
Jump to:
Find Part by Name
Keep searches simple, eg. "belt" or "pump".
Diagrams for RY49701
Viewing 2 of 2
Keep searches simple, eg. "belt" or "pump".
$17.30
This is an authentic OEM replacement part that has been sourced directly from the manufacturer. It is designed to fit select models of Log Splitters manufactured by Homelite and Ryobi, to ensure this ...
Special Order
Special Order
Special Order
Special Order
Special Order
Special Order
Special Order
Special Order
Special Order
Special Order
Special Order
Questions and Answers
We're sorry, but our Q&A experts are temporarily unavailable.
Please check back later if you still haven't found the answer you need.
- < Prev
- 1
- Next >
Sort by:
Search filter:
Clear Filter
Your search term must have 3 or more characters.
Keep searches simple. Use keywords, e.g. "leaking", "pump", "broken" or "fit".
Sorry, we couldn't find any existing answers that matched.
Try using some different or simpler keywords, or submit your new question by using the "Ask a Question" button above!
Try using some different or simpler keywords, or submit your new question by using the "Ask a Question" button above!
Michael
February 23, 2022
Hello, thanks for the quick response, the problem is that the ram valve assembly 099077001503 blew out so i don't know the sequence of how to put the new one in, can you send the steps on how to reinstall it?Thanks you,
mike
For model number RY49701
Hi Michael,
Thank you for your question. Before beginning this repair, make sure that the log splitter has been unplugged and release the pressure in the valve assembly. Also, place the log splitter on a tray to catch any oil that may come out. Then loosen the cylinder bolt. Then remove the handle over the ram. Then slowly pull the ram valve out. To install the new ram valve, push the new valve into place. Then tighten the cylinder bolt and reassemble the handle. If you have any questions, please let us know. We are open 7 days a week. We look forward to hearing from you!
2 people found this helpful.
Was this helpful?
Thank you for voting!
George
January 8, 2022
How do bleed air out of hydraulic system
For model number RY49701
Hello George, Thank you for your inquiry. To bleed or purge the air out, you need to extend the piston rod to its maximum length and remove the oil filling plug.
After that, twist the release screw in a counterclockwise motion as fast as you can. This will make the piston rod to draw back into the cylinder, which will release the trapped air. When purging the cylinder, please stay clear from the piston rod and use your protective gear. We hope this helps.
1 person found this helpful.
Was this helpful?
Thank you for voting!
Michael
February 22, 2022
How do you replace the ram valve assembly, which end goes in first?
For model number RY49701
Hello Michael, Thank you for the question. The small end goes in first. I hope this helps and good luck with your repair.
1 person found this helpful.
Was this helpful?
Thank you for voting!
Common Problems and Symptoms for RY49701
Viewing 1 of 1
Keep searches simple. Use keywords, e.g. "leaking", "pump", "broken" or "fit".
- Customer:
- Jan from FORTINE, MT
- Parts Used:
- 099077001037
- Difficulty Level:
- Very Easy
- Total Repair Time:
- Less than 15 mins
- Tools:
- Pliers, Screw drivers
Switch was sticking on my yardmax log splitter.
Removed sticky switch and replaced with new ryobi switch.
Was this instruction helpful to you?
Thank you for voting!