Models
>
1993LPO
1993LPO General Electric Ice Maker
Jump to:
Find Part by Name
Keep searches simple, eg. "belt" or "pump".
Diagrams for 1993LPO
Viewing 1 of 1
Keep searches simple, eg. "belt" or "pump".
The end cap is used to hold the retainer bar on the fridge door in place. This genuine OEM part is made of white plastic and can be used for either the left or righthand side of the bar. The retainer ...
In Stock
$33.91
This part is a replacement door shelf retainer bar for your refrigerator. The shelf retainer bar connects to the end cap on either side, and the end caps connect it to the refrigerator door. The retai...
In Stock
In Stock
In Stock
This white retainer bar might have to be cut-to-fit for the length of part you're needing.
No Longer Available
$80.28
This device acts like a clock. It continually advances and alternates between activating the cooling cycle and the defrost heater.
In Stock
In Stock
$183.30
This piece may be longer than needed. You may need to cut-to-fit for your appliance.
In Stock
Special Order
Special Order
Questions and Answers
We're sorry, but our Q&A experts are temporarily unavailable.
Please check back later if you still haven't found the answer you need.
Common Problems and Symptoms for 1993LPO
Viewing 1 of 1
Keep searches simple. Use keywords, e.g. "leaking", "pump", "broken" or "fit".
- Customer:
- ELLIS from LEANDER, TX
- Parts Used:
- WR9X520
- Difficulty Level:
- Really Easy
- Total Repair Time:
- Less than 15 mins
- Tools:
- Nutdriver
fridge was warm
first remove the one screw holding the cover over the defrost timer, grasp the timer and unplug from the male plug end. insert the new timer. replace the cover and the one screw. plug in the fridge enjoy.
my old fridge was 30 years old and i had to replace the timer many times.
my old fridge was 30 years old and i had to replace the timer many times.
Was this instruction helpful to you?
Thank you for voting!
- Customer:
- Elizabeth from Greenacres, FL
- Parts Used:
- WR71X10081, WR71X10080, WR2X9144
- Difficulty Level:
- Really Easy
- Total Repair Time:
- Less than 15 mins
we had a broken clip and bent door guards
First we removed he old parts and just popped out the new ones out of the plasric bags and put them in place it was awesome. and so much cheaper than going through a local parts store. I would definitely use again. Thank you so much.
Was this instruction helpful to you?
Thank you for voting!
- Customer:
- Arnold from Lighthouse Point, FL
- Parts Used:
- WR17X11773
- Difficulty Level:
- Really Easy
- Total Repair Time:
- Less than 15 mins
Door shelf retainer was damaged
I removed the original retainer and installed the new one.
Was this instruction helpful to you?
Thank you for voting!