Models
>
HA10TG31SB
HA10TG31SB General Electric
Jump to:
Find Part by Name
Keep searches simple, eg. "belt" or "pump".
Diagrams for HA10TG31SB
Viewing 3 of 3
Keep searches simple, eg. "belt" or "pump".
In Stock
In Stock
Special Order
In Stock
In Stock
Special Order
In Stock
In Stock
In Stock
In Stock
Special Order
Special Order
Questions and Answers
We're sorry, but our Q&A experts are temporarily unavailable.
Please check back later if you still haven't found the answer you need.
Keep searches simple. Use keywords, e.g. "leaking", "pump", "broken" or "fit".
- Customer:
- Andy from WEST POINT, MS
- Parts Used:
- WR87X27758
- Difficulty Level:
- A Bit Difficult
- Total Repair Time:
- 30 - 60 mins
- Tools:
- Screw drivers, Socket set
Refrigerator and freezer was not cooling.
I went to the back of the unit and could tell there was power getting to the the relay switch. The relay switch was making a buzzing sound, but was not engaging the compressor. Given the age of the unit, I took a chance and ordered a new relay switch thinking I didn’t have a compressor issue. The trick to installing a new relay switch is
... Read more
to leave the old relay on the unit until the new relay kit is received. There are several wires to connect. When removing the old switch, unhook one wire at a time and connect each wire removed to the new relay switch. The new relay switch is just like the old relay switch, so identifying where each wire goes is not a problem. After rewiring is complete, be sure to get the wire cover box back in place. The wire cover box keeps out any possible moisture. Plug in the refrigerator and you should here the compressor start.
Read less
Was this instruction helpful to you?
Thank you for voting!